MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: ReflexRob on March 24, 2016, 12:38:55 pm
-
Just wondering what the best spacer to use for the rear of my GTI with genuine Monza 2's on standard suspension that won't rub but that will sit more flush with the rear arch?
Cheers
-
I think it's around 10mm
-
Superb - thanks!
-
Was thinking doing the same, would 15mm be to much?
-
I'm going 15mm front and rear.
-
Was thinking doing the same, would 15mm be to much?
For the rear you might get away with it, the fronts I highly doubt it especially if lowered.
-
When I get mine I'll let you know once lowered 20-35 mm depends what I get. unless someone beats me to it :signLOL:
-
I can tell you when I had those wheels and 8mm spacers with 225/40-18 tires...it would just clear the well arch but rub the inner liners when pushing it hard through twisty's or if bumps were present through them. Normal or sane driving was never a problem. I was lowered to about 25" ground to arch tops. You being at stock height should be able to be safe at 10mm. You can poke the tread out with more of a spacer than that, but if you push the rubber out to the arch edges or beyond...I would suggest a rear ARB to keep it more level through the curves to avoid contact.
-
I'm running 12mm rear 8mm on fronts. On elbach springs
Sent from my SM-G925F using Tapatalk
-
I'm running 12mm rear 8mm on fronts. On elbach springs
Sent from my SM-G925F using Tapatalk
@Dub love (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=15825) how low?.
-
Think it's 25mm on the gti. So around 40mm. No rubbing.
Sent from my SM-G925F using Tapatalk
-
Think it's 25mm on the gti. So around 40mm. No rubbing.
Sent from my SM-G925F using Tapatalk
I don't understand what you mean by 40mm?. are they 25mm or 40mm?.
-
A gti is already 15mm lower and springs are 25mm so 40mm
Sent from my SM-G925F using Tapatalk
-
A gti is already 15mm lower and springs are 25mm so 40mm
Sent from my SM-G925F using Tapatalk
Lol now I get it :stupid:
The QS tt was 15mm lower than standard which looked like a tank until I lowered it by 40mm and it held its ground after that :party: need lowering and may even get the roll bar with uprated bushes for durability as well as firmness as you've mentioned it now :drinking:
-
Much appreciated chaps
-
Need to stop looking at the threads, iv spent a small fortune in my 3 week ownership! :signLOL:
-
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160327%2Fa46d4dcbad90b64a69aed223eebac1dc.jpg&hash=c5f126107c40ec82fc5e3fee0cc7d9adfcc0d4ee)elbach springs 25mm. 12mm rear spacers 8mm front.
Sent from my SM-G925F using Tapatalk
-
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160327%2Fa46d4dcbad90b64a69aed223eebac1dc.jpg&hash=c5f126107c40ec82fc5e3fee0cc7d9adfcc0d4ee)elbach springs 25mm. 12mm rear spacers 8mm front.
Sent from my SM-G925F using Tapatalk
And there's me thinking of fitting 15mm front and rear. yours looks close to the arch lip?.
-
I would say mines about bang on with no mods needed. You can go more on front but will have to do screw mod in middle of wing. I have no rubbing.
Sent from my SM-G925F using Tapatalk
-
Speed hump city round by me
Sent from my SM-G925F using Tapatalk
-
I have loads of speed bumps and some massive monster ones where I live but my tt 40mm lowered did manage quite well with 20mm front and 15mm rear spacers so thinking how bad can it be with 15mm all round with the golf?. can't be that bad surely?.
-
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160327%2Fa46d4dcbad90b64a69aed223eebac1dc.jpg&hash=c5f126107c40ec82fc5e3fee0cc7d9adfcc0d4ee)elbach springs 25mm. 12mm rear spacers 8mm front.
Sent from my SM-G925F using Tapatalk
That looks cracking!! The 18" monzas look good too