MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Farrie82 on May 06, 2016, 02:20:11 pm

Title: Joining 3" catback to 3" downpipe
Post by: Farrie82 on May 06, 2016, 02:20:11 pm
Hi all

Not long ago I have a stage 2 tune and had a 3" downpipe installed. I am now purchasing a Milltek 3" catback. My question is, how do I go about joining the catback to the downpipe?
Both joining ends of the downpipe and catback flare out to 80mm outer diameter.I just want to do a bolt on install with no welding but would also like to minimize any leaks.

Cheers.
Title: Re: Joining 3" catback to 3" downpipe
Post by: stuart-88 on May 06, 2016, 06:50:22 pm
eBay, you should be able to find a sleeve with clamps either end for the size you need
Title: Re: Joining 3" catback to 3" downpipe
Post by: Farrie82 on May 07, 2016, 03:40:14 am
Yeah I've seen the sleeves and clamps that are 76mm. I just not sure if they will fit over the joint as its about 80mm.