MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Vwgtiking on May 07, 2016, 10:54:05 am
-
I am after the part number for an inlet manifold for 2.0 Tdi bkd mk5 Jetta
I would also like to know if it's same part number as the golf? And possibly Audi that have engine codes bkd.
-
Anyone?
-
@TAPPY (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=9938)
-
Is it plastic or ally? For bkd I have found 03G128713 and 03G129713af
It would help if you pm me your chassis number as it will show what should be on your vehicle
-
It's alloy. Where can I find the chassis number? Is it the vin?
-
Yes vin no. :happy2:
-
Yes it's the vin number. Obviously via pm. That way I can tell you what vw say should be on that car
-
Hi mate. Here is vin. I may have another 1 or 2 checks in min
-
Tappy said not to post it on the forum.id say it's not a good idea to post it up for the wrong eyes.
-
Can a mod remove this pic before the wrong person sees it please @dazza (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=10457) @maxitrol (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=164) @Tfsi_Mike (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=293)
-
What pic :thinking:
-
:happy2:
-
:grin:
-
The 1 that is coming up for your car is 03G129713 Hope this helps
-
Lol thanks tappy. Do you have an explosive diagram of the rear suspension?
-
I can have a look on the catalogue for you. What is it you are looking for?
-
I think it's Called the rear lower suspension arm. Where my Jetta was lowered the bushes are a knackered.
-
Ahh the reason I asked is there's 4 pages and all have different components :signLOL:
I take it that it is the part the spring sits in?
-
I only had a quick look. Am unsure but I think it connects from under hub then to centre of car.
-
:worthless:
-
I believe your on about the lower track control arm. I'm just uploading it to photobucket and I will post up shortly as it's being a pita lol
-
Ok thanks mate.
-
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2FGti_mofo%2FRandom%2Fimage.jpg1_4.jpg&hash=7ca4b9b4843422302c291313fbc1da024b19a94a)
If that's the bit you are after that's highlighted yellow the bush comes in the arm
-
I think that maybe it but I thought it was more of just a rod from a to b. I will check with neighbour as he took it apart.
-
I may also need bush number 17.
-
Thanks again bud
-
I think that maybe it but I thought it was more of just a rod from a to b. I will check with neighbour as he took it apart.
Yeah check with him first. I believe you can get bush 17 as there's a on for it. Keep us updated.
-
Will do as having calipers done on Tuesday.
-
@tappy do you know the part number for a tfsi rear valance (has a cutout and mine doesn't)
-
You mean a cut out for the exhaust?
-
1K5807521 exhaust cut out
1K5807433 tow bar cut out
Try those into Google and see which is right for you :happy2:
-
Thanks tappy. I had the top part number as the gli rear valance. Don't suppose you have the part number for the gli valance then?
-
I will have a look in a bit bud