Post by: loop on May 19, 2016, 02:37:29 am
Sent from my iPhone using Tapatalk
Post by: loop on May 21, 2016, 06:13:54 pm
Sent from my iPhone using Tapatalk
Post by: Andy on May 21, 2016, 07:25:42 pm
Post by: loop on May 21, 2016, 07:35:53 pm
I made some new pods out of mdf but think you can buy them nowOk cheers. Which speakers did you put in? Is it easy enough to fit them and crossover in behind the door cards?
Post by: Andy on May 21, 2016, 08:47:53 pm
.
Post by: loop on May 21, 2016, 09:41:30 pm
I fitted ground zero in mine but the cross overs were to big to go in the doors,but members on here have put them in with the hertz ones,also ran new speaker wire to them as am running ampsI'm going without an amp to start with, which I know people will say Is wrong, but I may add one in future.
.
Post by: loop on May 30, 2016, 08:20:04 pm
Also didn't realise I will need something to mount the mids on so had to abort the install for another day.
Sent from my iPhone using Tapatalk
Post by: Octoparrot on May 31, 2016, 07:08:01 pm
Post by: loop on May 31, 2016, 11:08:08 pm
I take it your car only has the 2 speakers in each front door? Mine was also like this and I had to make up some adaptor plates out of 3mm thick plastic sheet I bought off eBay to be able to fit the mid speakers in the door cards.Hi, well there are the mids and the woofers in the front doors plus the tweeters in the triangle shaped fitting by the pillar.
Yes the mid is the problem -I will need to do something similar to your solution with the plastic sheet. It will have to be something very slim in order to fit the 3.5" mid speaker in the space.
I can't see how I can fit the crossovers though without modifying the door card somehow or maybe fit them under the seats but that would mean extending all the speaker cabling into the car.
Sent from my iPhone using Tapatalk
Post by: Octoparrot on May 31, 2016, 11:27:50 pm
Post by: r5gtt on May 31, 2016, 11:39:07 pm
Has anyone thought of fitting the crossovers to the window regulator side by removing the outer skin as there's bound to be loads of space behind there?.
Post by: loop on June 01, 2016, 01:20:14 am
I fitted a rainbow system to mine which has 2 crossovers. Both of the I attached to the door card. One in the bottom corner at an angle and the other underneath the arm rest towards the rear edge of the door card. Mines a 3 door so maybe there's more room if yours is a 5 door?Mine is a 5 door. The only space would be to take out the VW crossover and fix the new one there in its place, but even that might not fit as the Hertz crossovers are twice the size of the VW one.
3 door definitely has more space and what the 5 door is lacking.
Has anyone thought of fitting the crossovers to the window regulator side by removing the outer skin as there's bound to be loads of space behind there?.
Ok thanks I didn't realise there was a difference between the 3 and 5 door in that sense.
I think the crossover would get in the way of the window when it's down and it could get damaged by rain water if in the outer skin?
Post by: r5gtt on June 01, 2016, 02:02:29 am
Not if you do what I did with my mark 3 lol wrap them in parts bags :happy2: I'm not dumb and there's always space in the doors. :PI fitted a rainbow system to mine which has 2 crossovers. Both of the I attached to the door card. One in the bottom corner at an angle and the other underneath the arm rest towards the rear edge of the door card. Mines a 3 door so maybe there's more room if yours is a 5 door?Mine is a 5 door. The only space would be to take out the VW crossover and fix the new one there in its place, but even that might not fit as the Hertz crossovers are twice the size of the VW one.3 door definitely has more space and what the 5 door is lacking.
Has anyone thought of fitting the crossovers to the window regulator side by removing the outer skin as there's bound to be loads of space behind there?.
Ok thanks I didn't realise there was a difference between the 3 and 5 door in that sense.
I think the crossover would get in the way of the window when it's down and it could get damaged by rain water if in the outer skin?
Post by: loop on June 03, 2016, 02:33:58 am
LolNot if you do what I did with my mark 3 lol wrap them in parts bags :happy2: I'm not dumb and there's always space in the doors. :PI fitted a rainbow system to mine which has 2 crossovers. Both of the I attached to the door card. One in the bottom corner at an angle and the other underneath the arm rest towards the rear edge of the door card. Mines a 3 door so maybe there's more room if yours is a 5 door?Mine is a 5 door. The only space would be to take out the VW crossover and fix the new one there in its place, but even that might not fit as the Hertz crossovers are twice the size of the VW one.3 door definitely has more space and what the 5 door is lacking.
Has anyone thought of fitting the crossovers to the window regulator side by removing the outer skin as there's bound to be loads of space behind there?.
Ok thanks I didn't realise there was a difference between the 3 and 5 door in that sense.
I think the crossover would get in the way of the window when it's down and it could get damaged by rain water if in the outer skin?
Don't think I will do that! I think I will have to modify the door cards to get the crossovers to fit.
Also the 165mm pods I bought for the woofers were far too small? Looks like the size I need is nearer 200mm?
Sent from my iPhone using Tapatalk
Post by: Octoparrot on June 03, 2016, 06:25:01 pm
Post by: r5gtt on June 03, 2016, 06:58:19 pm
Post by: Octoparrot on June 03, 2016, 11:33:04 pm