MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Markis236 on June 12, 2016, 09:56:52 am

Title: Car won't run !!!
Post by: Markis236 on June 12, 2016, 09:56:52 am

Ok so I finally
Got my car back to stage 2 at revo and when I was driving home my intercooler to throttle boost pipe blow off and now my car won't run at all ! It starts and then cuts out and won't move any where ! Does it keep the existing fault in the ecu and have to be deleted before it will run right ?

Title: Re: Car won't run !!!
Post by: slix on June 12, 2016, 10:13:19 am

It should run with pipe put back on even with a code stored.

Title: Re: Car won't run !!!
Post by: Markis236 on June 12, 2016, 10:19:11 am

Lookes like I'll have to fine a fault code reader then haha

Title: Re: Car won't run !!!
Post by: bluebert92 on June 12, 2016, 11:57:59 am

Where are you based?

Title: Re: Car won't run !!!
Post by: Markis236 on June 12, 2016, 11:59:40 am

Phoned a mate with a fault code reader and dealt all the fault and the car runs fine now ? Must remember the cad and stop the car from starting then

Title: Re: Car won't run !!!
Post by: slix on June 12, 2016, 12:08:56 pm

Quote from: Markis236 on June 12, 2016, 11:59:40 am

Phoned a mate with a fault code reader and dealt all the fault and the car runs fine now ? Must remember the cad and stop the car from starting then

Don't think it works that way. It's just a stored code. Not a live thing. Must have been luck or leaving car turned off fixed it.