MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: r5gtt on July 31, 2016, 01:54:55 am
-
What size gasket to the matting faces?. 3 inch ?
-
You mean turbo flange gasket? Just get an OEM one from vw
-
I need to get that with 4x bolts and nuts but I mean the down pipe to cat.
Thanks
-
The downpipe and cat is all one bit. Not sure what you are asking .....
-
The downpipe and cat is all one bit. Not sure what you are asking .....
No he's using the Quattro setup, so in two pieces
-
Ohh ok.
Btw the turbo flange is studded so you only need new nuts if you really want to change them
Not sure about the dp connector. But the internal diameter will be 3"
-
Thanks @v4rley (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=6697) sorry I should have mentioned I'm using the Quattro set up.
My bad @rich83 (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=709) Two studs are stripped from before and two have snapped, one whilst undoing it and the other whilst doing up. both front upper and lower ones so in a predicament atm and have to be changed along with the nuts :sad1:
stupidly watched a YouTube video and thought peace of P. :slap:
Thanks
-
Ahh bollocks.
-
Yes defo :doh: will be doing it next weekend not thay I want to go inot work as he'd want me to fit up a few cars before I start on mine. orderes a set of stud removers last night as I don't have any.