MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Haroon_96 on January 07, 2017, 02:49:24 am

Title: Edition 30 Splitter fitting to a standard non-gti bumper
Post by: Haroon_96 on January 07, 2017, 02:49:24 am

I have seen this done before and just wondering if any members have done the same and have any install pictures or tips? Currently have an LCR splitter but Ed30 will look much nicer.

Title: Re: Edition 30 Splitter fitting to a standard non-gti bumper
Post by: Andy on January 07, 2017, 09:44:34 am

They are a direct fit just expensive

Title: Re: Edition 30 Splitter fitting to a standard non-gti bumper
Post by: Kai96 on January 07, 2017, 12:17:16 pm

Better just getting an aftermarket splitter imo , check my post there should be a pic of mine in there somewhere

Title: Re: Edition 30 Splitter fitting to a standard non-gti bumper
Post by: Haroon_96 on January 07, 2017, 10:47:31 pm

Andy I think you misunderstood, I have a non gti bumper! Or are you confirmimg that the ed30 splitter will fit that bumper?

And kai, I'm planning on getting aftermarkey anyway.. £89 after a quick glance on eBay

[img]https://i.ebayimg.com/00/s/NTc5WDEwMjQ=/z/LhcAAOSw9NdXquVT/$_86.JPG/img]

Looks like this