MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: xs2man on May 22, 2017, 01:01:46 am
-
So I am fitting my RNS 510 and Fiscon Bluetooth into my Edition 30. My phone wont see the Fiscon to connect to it though. And I don't yet have a highline cluster in the car to see if ti shows up there.
I was wanting to try to factory reset it, but that wont work without either connecting a phone (which it wont do if it already has 5 connections), or a highline cluster. Well, as far as I can tell.
Any ideas? I have enabled telephone with VCDS in the CAN gateway (although I am using a version Q, which I believe comes from a Passat or something). But in general, I get nothing.
Also, my ipod connection under the arm rest doesn't appear to be working. Was working fine with my MFD2 before. Is it not compatible?
-
Ok,
So after todays outing in the car, I did manage to connect to the Fiscon. However, I couldn't get anything to show on screen. When I hit the phone button, all it does is mute the audio. When I un-mute the audio (by pressing the phone button again), the volume is significantly lower than it was originally. Any idea why it wouldn't show anything on-screen?
Also, I received a call while driving, and I had to answer it with the phone (luckily on a decent mount), but the microphone didn't work. Now, I am connected to the Parrot microphone I had initially installed, mostly because it was already run. But do I need to get a proper Kufatec or VW mic for this system to work?
Also, I notice from some posts that reverse parking sensors, and the climate controls can appear on the RNS 510 screen. Is this possible with the standard mk5 equipment? Or do I need to move up to mk6 components? If mk5 will work, how would I go about getting that to work?