MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: willni on February 04, 2018, 03:27:20 pm
-
Could anyone with factory xenons provide me with the information or picture of where their auto-leveling brackets are mounted and what side they should be on (drivers or Passenger)?
-
they are on the passenger side
-
Just took mine off today..yep passenger front and rear
-
Just took mine off today..yep passenger front and rear
Would you be selling the Sensors/brackets at all?
-
Just sold them mate along with all the wiring
Stripping my car all day before the scrappage takes her away..lol
-
Just sold them mate along with all the wiring
Stripping my car all day before the scrappage takes her away..lol
Damn would've bounced down to Dublin tonight lol
-
Anything else you need??...lol
-
Car.systems.pl is best place to get the sensors
-
Car.systems.pl is best place to get the sensors
Thanks!
and unfortunately not until i sort auto-leveling and get a few bits painted
-
Finally got round to ordering the sensors and now just about to order the wiring for this job, jacked the car up this morning to have a look on where the sensors actually connect but I can't seem to see anywhere overly viable. Can anyone see the original mounting points on the front arm pictures below; or have their own photos from previous work?
-
(https://uploads.tapatalk-cdn.com/20180701/0e32a1dc19760048688197ac3119e417.jpg)
(https://uploads.tapatalk-cdn.com/20180701/a085bebcc8b54d278e9db3194095c8af.jpg)
Sent from my iPhone using Tapatalk
-
The two little holes in the control arm are where the bottom of the bracket fixes to. Above that should be the mounting point for the sensor body/bracket on the subframe to body shell if I remember correctly (you can see it in first picture).
Hope this helps.
-
The two little holes in the control arm are where the bottom of the bracket fixes to. Above that should be the mounting point for the sensor body/bracket on the subframe to body shell if I remember correctly (you can see it in first picture).
Hope this helps.
That's great I see it, now thank you very much.
-
No problem and all the best with the conversion.