MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: lennshow66 on February 25, 2018, 05:13:38 pm

Title: Brake Pad Warning Light
Post by: lennshow66 on February 25, 2018, 05:13:38 pm

Hi all,

Just replaced all my brakes but now the warning light is on the dash.

The previous owner of the car or some garage looks like they have cut the connector to the brake pad warning sensor off.

What options do I have here?

Thanks

Title: Re: Brake Pad Warning Light
Post by: 4ndy on February 25, 2018, 07:33:05 pm

Just replaced these because of corrosion causing the dash light. https://www.ebay.co.uk/itm/VW-2-Pin-connector-with-30cm-tail-leads-1J0973802-FREEPOST-Finishing-Kit/323099092060?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649
 Easy fit with either solder or included connectors.

Title: Re: Brake Pad Warning Light
Post by: Andy on February 25, 2018, 07:51:22 pm

join the wires together when the sensor plugs in or replace loom
get the sensor coded out