MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Jgavin1 on April 09, 2018, 09:34:51 pm

Title: 30 edition decat advice needed
Post by: Jgavin1 on April 09, 2018, 09:34:51 pm
Hi all just picked up my ed30 after selling my M3 (trying to be sensible)

Anyway the guy who sold me it has stuck a revo intake, miltek cat back and a Scorpion decat downpipe on with the intention of remapping it but financial issues struck hence why he sold the car. He did advise me that the eml might come on and it just has.

I’m wondering, would the car be ok running the decat as in would it run rich and lose power ? It still does feel quick even compared the V8 in the m3!  And could I just use a sensor spacer to trick it. Decatted my m3 and used a spacer that worked just fine. I thought about remapping it but I worry the clutch may suffer, it’s on 80k miles. Or do I try to source a standard cat ?

Any advice is greatly appreciated
Title: Re: 30 edition decat advice needed
Post by: Dan_FR on April 10, 2018, 07:23:20 am
Clutch is a consumable, it is going to need replacing at some point.

Do not use a spacer, the secondary lambda is not only there to check the performance of the catalytic converter. Either get a standard cat or get it mapped - the latter will bring plenty of smiles and will surprise you with the increase in power & capability of the car.  These engines on the standard map feel dull and lifeless. Get it mapped and enjoy it properly
Title: Re: 30 edition decat advice needed
Post by: Bodyboarder81 on April 10, 2018, 04:48:36 pm
My stage 2 feels just as quick up to 120 to my old v8 m3 for reference

Get it mapped :happy2:
Title: Re: 30 edition decat advice needed
Post by: gt28 on April 10, 2018, 08:53:24 pm
My stage 2 feels just as quick up to 120 to my old v8 m3 for reference

Get it mapped :happy2:
[/quote
 Hi. sorry to do it this way, i know this isn't the correct place to do this, but I'm unable to contact you any other way, because i haven't posted enough. I'm interested in your coilovers.
Title: Re: 30 edition decat advice needed
Post by: Bodyboarder81 on April 10, 2018, 09:31:10 pm
My stage 2 feels just as quick up to 120 to my old v8 m3 for reference

Get it mapped :happy2:
[/quote
 Hi. sorry to do it this way, i know this isn't the correct place to do this, but I'm unable to contact you any other way, because i haven't posted enough. I'm interested in your coilovers.

Think they are sold ... chap wants to pop down this Saturday. If it falls through I’ll get in contact  :happy2:

Thanks josh
Title: Re: 30 edition decat advice needed
Post by: Jgavin1 on April 10, 2018, 11:03:38 pm
I truly do want to map it but the thought of spending a grand+ to get a new clutch hurts my soul 😂

Where would be the best place to get an updated clutch and or flywheel  and estimate for cost?
Title: Re: 30 edition decat advice needed
Post by: AJP on April 10, 2018, 11:42:50 pm
I truly do want to map it but the thought of spending a grand+ to get a new clutch hurts my soul

Where would be the best place to get an updated clutch and or flywheel  and estimate for cost?
Shouldn't cost that much. Get a Helix Organic clutch with an LUK flywheel. I got mine from AKS.

Clutch is good for 400lb/ft apparently. Feels like stock but a bit heavier. It'd be a real shame to go back to a standard cat in your position. The standard cat and downpipe is probably the biggest bottleneck on these cars.
Title: Re: 30 edition decat advice needed
Post by: Mitch H on April 11, 2018, 06:15:50 pm
I have 2 standard downpipes if your interested :) but as above get it mapped !
Title: Re: 30 edition decat advice needed
Post by: Jgavin1 on April 11, 2018, 10:03:23 pm
You lot are buggers convincing me, think I’m gonna take the plunge 😂 so much for getting a cheaper car and being sensible
Title: Re: 30 edition decat advice needed
Post by: pudding on April 12, 2018, 10:51:57 am
I have 2 standard downpipes if your interested :) but as above get it mapped !

I’ll take one off you (the best one  :smiley:) if it’s reasonable money!
Title: Re: 30 edition decat advice needed
Post by: Mitch H on April 12, 2018, 11:55:26 pm
I have 2 standard downpipes if your interested :) but as above get it mapped !

I’ll take one off you (the best one  :smiley:) if it’s reasonable money!
Make me an offer mate :) collection would be better as they're heavy where you from
Title: Re: 30 edition decat advice needed
Post by: pudding on April 13, 2018, 03:10:57 pm
Ah I've deduced you're from Sheffield way, so collection isn't viable as I'm in the south  :smiley:  Up to you if you can be arsed to post it or not, I know it's a ball ache!
Title: Re: 30 edition decat advice needed
Post by: ROH ECHT on April 14, 2018, 08:07:01 pm
Catless doesn't make it change its lambda or air/fuel mixture. Nor does it detect lambda. The 2nd O2 will detect improper cat function and that is where the code will come from. The angled O2 spacer for the 2nd O2 sensor is a hit or miss. Some have added it when catless and still got the code. Because of this I purchased a cheap option on ebay for under $15usd. Figured if it works, great, but if not...not much of a loss. I positioned it to hold the sensor forward and upwards just a bit and never see a code.
(https://farm5.staticflickr.com/4140/35318013910_d991fe7937.jpg) (https://flic.kr/p/VNW45j)