MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Rsdene on April 22, 2019, 09:03:45 am

Title: Mk2 TT wishbones s3 hubs
Post by: Rsdene on April 22, 2019, 09:03:45 am

Hi there, could anyone shed any light on my current setup and issues with tt arms?
My setup is as follows, mk2 tt arms, s3 hubs with mk2 tt adjustable ball joints. I have an issue with the track rod hitting the anti roll bar which is a h&r adjustable roll bar. Also the ball joint bolt now hits the inside of the disc. Only does this on the drivers side. The car has ap 6 pot brakes with 362mm discs and h&r clubsport coilovers with adjustable top mounts. Any help would be greatly received cheers
Dene

Title: Re: Mk2 TT wishbones s3 hubs
Post by: Christiank on April 24, 2019, 06:51:55 pm

If you're using TT2 parts all has to be TT2 parts

Cupra, S3 and Passat are the same and can be mixed matched - TT2 are different and has be all TT2.. Tie rods, wishbones and hubs

Title: Re: Mk2 TT wishbones s3 hubs
Post by: colesey on April 25, 2019, 05:41:44 am

Your best bet is probably to replace the TT arms / balljoints with ones from a Passat B6. The adjustable top mounts will give you all the camber you want.