MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: PROSEAL on June 09, 2020, 06:08:34 pm
-
Hi, looking for some guidance with my MK5 factory fitted with RNS510. Presently the car does not have MFSW, instead uses the wiper stalk to control the Highline Red MFD+.
This weekend I installed the OEM Bluetooth module 9W2 type - 1K8 035 730D with pass-through OEM loom (no splicing).
However, I have not yet actually plugged in the module (underneath the driver seat). Both have been located and ready.
Problem is that Ross-Tech advise this is good for both Red and White screen MFD/MFI, but many other sellers seem to show this module now only suitable for MK6 Golf...so I am nervous to plug in and create errors across the various related modules. Needing to find a garage that can program. But secondly to this, some of the online references also advise that I need MFSW buttons to be able to add the phone, as the RNS510 cannot do such. Is this correct?
Should I wait until the MFSW is installed (MK5) and then attempt to setup at such time?
Or will this bluetooth module work now (assuming I find somebody local to Jct 24 M1) to do such? Have I used the right module? According to Ross tech, the 730D supersedes the A, B and C models in the notes.
Any advice would be appreciated...