MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Gti_petrolhead on April 21, 2021, 12:05:41 am

Title: Overrun on remap
Post by: Gti_petrolhead on April 21, 2021, 12:05:41 am
Hey guys,

i am stage 1 now and my mapper mapped in overrun 5k+ rpm so when i pass 5k+ rpm and i let go off the throttle it pops. How bad is this? Could i blow up my engine or will i be fine?
Title: Re: Overrun on remap
Post by: Hypertuned on April 21, 2021, 02:43:49 pm
It wastes a little fuel won't cause any harm to your engine. Loads of people have this mapped in, but it's not for me.

Sent from my SM-N9750 using Tapatalk

Title: Re: Overrun on remap
Post by: DBXdarkangel on April 21, 2021, 04:14:36 pm
Not for me either. Reminds me of chavs in a saxo or corsa. 
Title: Re: Overrun on remap
Post by: colesey on April 21, 2021, 04:39:19 pm
Is fine if you’re running twin webers / itbs on a nasp engine with loads of cam overlap but rather synthetic on a turbo car. Not for me either!
Title: Re: Overrun on remap
Post by: Gti_petrolhead on April 21, 2021, 07:38:04 pm
It wastes a little fuel won't cause any harm to your engine. Loads of people have this mapped in, but it's not for me.

Sent from my SM-N9750 using Tapatalk



I hardly do it anyways i just got it mapped in for the bants. I got the BWA engine some people said it will blow my engine tho
Title: Re: Overrun on remap
Post by: rich83 on April 21, 2021, 07:54:35 pm
The person you need to be asking these questions to is the person who mapped it.
Title: Re: Overrun on remap
Post by: Gti_petrolhead on April 21, 2021, 08:12:42 pm
The person you need to be asking these questions to is the person who mapped it.


I did he said dont abuse it and your good. But i wanted to ask here to see what you guys say.
Title: Re: Overrun on remap
Post by: rich83 on April 21, 2021, 08:41:28 pm
The person you need to be asking these questions to is the person who mapped it.


I did he said dont abuse it and your good. But i wanted to ask here to see what you guys say.

That is the wording that would worry me. I personally wouldnt want my car popping and banging, but its the owners call.
Title: Re: Overrun on remap
Post by: pudding on April 23, 2021, 10:08:38 pm
Deliberately causing unnecessary explosions on over-run damages the turbo, exhaust valves, the cats and also the silencers, if severe enough.  I've seen resonators/silencers burst apart from pops and bangs maps.  The pressure has to go somewhere.

Naturally, none of that happens immediately, but one or more of those things WILL happen eventually.  The early signs of imminent ££s are disintigrated catalyst crumbs flying out of the tailpipe, and maybe a turbine wheel blade or two.

I think the fascination for bangs and flames stems from Rally cars, but those engines are built to handle it.  Maram turbo shafts, inconel turbines, inconel exhaust valves, no cats, no silencers and they don't have to last many miles.

Of course people selling you the map are going to say "Yeah it's fine mate, don't worry about it".  It's not their property to give a sh1t about.

It's your car, your money, but if you want the engine to last, I would leave the pops and bangs personally.  Your local residents would probably appreciate it as well because frankly, it's obnoxious, annoying and about as cool as socks and sandals.