MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: LeeEv on August 18, 2023, 12:36:08 pm
-
Hi everyone!
I'm about to put new seals on my ultrasonically cleaned BKD injectors. The collar in-between the seals is free spinning. Before I install the injectors back into the car, does the collar need to be in a certain position or does it not matter?
Also, the manual says to use tool T10164/1 and T10164/2 when installing the new o rings. Is this definitely needed? Getting hold of the tool is difficult. Obviously the main thing is that they don't get twisted.
Thanks in advance.
(https://i.postimg.cc/KckLV5Lh/IMG-20230817-122403.jpg) (https://postimg.cc/PNHPvY2S)