MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Soltype on June 02, 2024, 07:18:25 am
-
I upgraded the clutch in my 08 GTI to a TTRS plate and everything was fine for about 2 months until my slave cylinder started leaking. I decided to get an aftermarket hydraulic bearing but i can't get any air gap.I also suspect the OEM bearing was bottomed out based on the measurements,which lead to its failure. Is there anyway to get some space between the bearing and the pressure plate?I am out of ideas with this transmission, and I'd appreciate any input.