MK5 Golf GTI
All Things Mk5 => How to Guides / Troubleshooting => Topic started by: Tfsi_Mike on April 18, 2010, 02:44:54 pm
-
This morning my clutch pedal has started sticking half way down. Having to put my foot under it and pull it back up.
Only thing thats changed is the BSH mounts, Ive been driving it since I had them fitted though and was fine until this morning.
Any one know whats wrong?
Thanks in advance
-
I think a couple of your fellow cupra boys posted about this a month or 2 back. I seem to remember that no one had found a cure yet.
-
basic checks first but I think one was down to a narrowed hose problem.
Ill dig out the thread.
-
basic checks first but I think one was down to a narrowed hose problem.
Ill dig out the thread.
thanks!!!!
-
Mike you made any progress with this?
-
Mike you made any progress with this?
[/quote
Hasnt done it since, but im weary. Ill let you know if anything comes of it matey
-
Thanks, im goign in for clutch change in 2 weeks just hope it all goes to plan
-
Thanks, im goign in for clutch change in 2 weeks just hope it all goes to plan
What clutch, where fitted etc etc :party:
-
going to VWR to get it fitted and going for a VWR clutch and pressure plate same as yours i think?
-
going to VWR to get it fitted and going for a VWR clutch and pressure plate same as yours i think?
Yea. Although I dont have the pressure plate as the wrong one turned up. So far so good though!
-
Hmm how the car feel with out the uprated pressure plate? no signs of sliping?
-
Mine and waynes do this. We both changed the master cylinder and it didnt cure it.
-
Mine did this after the clutch was changed, but I re-bled the clutch pumping the pedal, and some black stuff came out. Been fine since.
I changed the slave cylinder in the gearbox when the clutch was changed.
-
going to VWR to get it fitted and going for a VWR clutch and pressure plate same as yours i think?
Yea. Although I dont have the pressure plate as the wrong one turned up. So far so good though!
So do you just have the clutch plate installed and everything else oem?
-
going to VWR to get it fitted and going for a VWR clutch and pressure plate same as yours i think?
Yea. Although I dont have the pressure plate as the wrong one turned up. So far so good though!
So do you just have the clutch plate installed and everything else oem?
yes mate. When I get the diff I'll definately be having the lot. Not that the plate alone has struggled.
-
going to VWR to get it fitted and going for a VWR clutch and pressure plate same as yours i think?
Yea. Although I dont have the pressure plate as the wrong one turned up. So far so good though!
So do you just have the clutch plate installed and everything else oem?
Im going to get the cover plate and clutch plate done on tuesday
-
mine does this daily mate its a royal ball ache
seat was "unable to reproduce" the issue when they changed my master cylinder yet when i drove home from the deal it done it...
i have got used to it now :( will most likely put up with it till i fit a new uprated clutch.
my adui tech mate said its the pressure plate not springing back once its been depressed but i dont think thats accurate as the pedal goes all soft before i put my foot down.
o well, just another week vag part to add to the list
-
Old thread revival :wink:
Having the same problem, will be ordering a master cylinder on Monday morning..
-
Thread revival,
Did anybody find out the cause of the problem ?