MK5 Golf GTI
All Things Mk5 => How to Guides / Troubleshooting => Topic started by: Howardvwgolf on May 30, 2010, 05:29:48 pm
-
ive just removed the rear wiper. the problem im having now is that the washer fluid still pumps if you operate the stalk, but in a thread on another site it said that the fluid doesnt pump once the wiper motor assembly is taken off? so what should i do to stop the fluid pumping into the boot?any thoughts guys, i know a few of you have done this mod
-
It can be capped off back at the washer end. Also you can clip it off at the tailgate end just in case you ever want to re-instate it. Thought about this mod myself, but the rear wiper is a godsend in winter and bad weather.
-
i thought about just bending the pipe back on itself and cable tieing it, but i dont want the pipe to split. So now im thinking of getting a washer hose Y connector, plugging one part in the end of the pipe which connected to the wiper, and then putting a piece of rubber pipe connecting the other two parts of the 'Y' together
-
I plugged the hole and then disabled the rear wiper via Vag.com. Worked a treat :happy2:
-
I plugged the hole and then disabled the rear wiper via Vag.com. Worked a treat :happy2:
When i did mine we disabled it with VCDS but then the front ones wouldn't work, all that is needed is to block the pipe. :smiley:
-
mines done through vcds, and my fronts still work. :smiley:
-
mines done through vcds, and my fronts still work. :smiley:
Same here, Come on TC sort you coding out :wink: