MK5 Golf GTI

All Things Mk5 => How to Guides / Troubleshooting => Topic started by: Pullafacial on July 05, 2010, 03:59:27 pm

Title: help needed fitting Pipercross viper please...
Post by: Pullafacial on July 05, 2010, 03:59:27 pm

Hi all,

I fitted my viper induction kit this afternoon but can't see where to route the pipe to get a good cold air feed.
Currently i'm running it without the pipe so guess i'm sucking up loads of warm air.

Also, I expected it to give my engine a bit more of a "gruntier" sound but it sounds pretty much the same.



Any help appreciated...

Title: Re: help needed fitting Pipercross viper please...
Post by: MAT ED30 on July 05, 2010, 04:49:54 pm

did u take the filter out of the stock engine cover first ? and just put the air feed down to the nsf foglight cover but cut some holes in the cover

Title: Re: help needed fitting Pipercross viper please...
Post by: Pullafacial on July 05, 2010, 05:24:09 pm

Yeah took stock filter out, will try and route down to foglamp.
Not sure if I like the idea of cutting holes though!

Title: Re: help needed fitting Pipercross viper please...
Post by: MAT ED30 on July 05, 2010, 05:44:21 pm

just drill some of the little cut outs in the foglight covers out  :smiley: nice and easy to do