MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: clive_gti on January 27, 2009, 08:44:13 pm
-
Anyone have one fitted to a mk5? I'm thinking of buying one to replace my RCD-500 which must hail from the 90's as it's never heard of mp3's :sad: I have read the many threads praising the RNS-510 but I don't need the nav and it (along with the hard disk and DVD capability) is a £400 premium over its little brother. Then again, maybe I would re-coup the difference when I come to sell the car?
-
RCD-510 is a very good unit and if your happy to go without the Nav, Hard Drive and DVD playback support then it's a good upgrade from the old RCD-500. :happy2:
-
Cheers Steve,
I've seen 2 different part numbers for the RCD-510:
3C8 035 195
1K0 035 195 AA
Anyone know why and would both work in the mk5?
-
1K0 is the one you want for the Golf.
3C looks like it might be either Skoda or Seat?
-
^^^
Thats good cause I just won one on ebay with the "1K0..." part number!
Anyone know what aerial adaptors I will need for fitting?
Also will any VAG-COM programming be required when I swap out the RCD-500 for the RCD-510? I have the VW sound pack with amplifier & 10 speakers if that makes any difference.
Pics to follow!
-
Dunno about connectors, but if it's the same as the RNS-510 the two seperate FAKRA hoods have been put together into a single FAKRA hood which requires a new mating half (can't recall part # right now).
As you have the sound pack you may need a bit of VCDS work.
-
Sorry to hijack your thread, anyone fitted one of these units to a car fitted with the VW Soundpack? :wink:
-
3C is the Passat Chassis not Skoda or SEAT.
If you have soundpack then I would think coding is required.
-
How will I know if the sound pack needs coding? Will no sound come out of the speakers?
And when I take it to my local VW dealer what do i need to ask for? Will they understand if I say "my soundpack needs coding to work with the new radio"?
BTW as regards aerial adaptors I bought the following one from ebay, think it should be what I need:
http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=110318654994
-
VW should be able to code it for you without you needing to give them precise instructions.
-
My RCD-510 turned up yesterday but appears to be faulty :(
When I press the load/eject button, then select a slot (1-6) it just displays an error message after a short delay:
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdl.getdropbox.com%2Fu%2F185320%2FDSC00562.JPG&hash=990343532b51163baf86cdff8de1ca59b85f8833)
I can't hear the mechanism moving to load the cd and the slot remains closed. I read that there are 2 ground wires in the wiring harness that need swapped (cd gnd + aux gnd) which I haven't done, could that be the cause?
Any other ideas before I return the unit for a refund?
-
My CD-changer worked without swapping the ground pins with my RNS-510, although the sound was really really awful. I swapped the ground and sound was good. I'm not sure if the RCD-510 is the same but the CD-GND/AUX-GND pins need to be swapped on the harness. Get a really really tiny flathead screwdriver and try it out.
Otherwise you might need to recode it? Don't think so but it's a thoguht.
-
Had to send it back for a refund/exchange. I really hope I can get another as I really liked it.