MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: NEWEY on February 12, 2009, 12:30:52 pm

Title: Anyone wanting to do the r32 milltek on the gti??
Post by: NEWEY on February 12, 2009, 12:30:52 pm

just found this while looking through ebay. might be of some use to someone :)

http://cgi.ebay.co.uk/VW-R32-golf-rear-bumper-complete-MK5-MK-5-GTI-FSI-R-32_W0QQitemZ170301372707QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item170301372707&_trksid=p3286.c0.m14&_trkparms=72%3A1701%7C66%3A4%7C65%3A12%7C39%3A1%7C240%3A1318

Title: Re: Anyone wanting to do the r32 milltek on the gti??
Post by: Greeners on February 12, 2009, 03:18:56 pm

Clever how they get those rear lights to work while it's not attached to the car  :signIWS: :laugh: :signLOL:

P.S. I'd do this mod If I had a GTI  :wink:

Title: Re: Anyone wanting to do the r32 milltek on the gti??
Post by: TomB on February 13, 2009, 06:24:02 pm

Thanks, I was hoping it'd end cheap :(

Title: Re: Anyone wanting to do the r32 milltek on the gti??
Post by: Top Cat on February 13, 2009, 06:35:32 pm

That particular bumper has been up 3 separate times i think there is a small crease by the number plate i believe, if anyone is interested in this ask for more and better pics.  :happy2:

Title: Re: Anyone wanting to do the r32 milltek on the gti??
Post by: TomB on February 13, 2009, 11:57:17 pm

Thanks for the heads up, I will ask about that.

You only need the bottom part, right?  I was hoping to fit it to the GTI top part to save spraying costs.

Title: Re: Anyone wanting to do the r32 milltek on the gti??
Post by: joesgti on February 14, 2009, 12:49:51 am

it attatches to the upper part, see my project for more info  :smiley: