MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: martziniuk on October 22, 2010, 09:57:23 pm

Title: LUK flywheel part number
Post by: martziniuk on October 22, 2010, 09:57:23 pm

Does anyone know the part number of the Gti LUK flywheel and concentric slave? I need LUK number not VAG.
I rang LUK but they insisted they did not do them for the vRS and don't do them for the Gti either  :stupid:

Title: Re: LUK flywheel part number
Post by: martziniuk on October 23, 2010, 05:10:42 pm

No one know?
I believe the flywheel part numbers for the 200bhp GTI is either  415033010 or 415034210
Concentric Slave Cylinder  510007110 or 510010710
No one have a genuine one sat around they can check to see if there is a part number on it?
Would save me atleast £200 over dealer prices from here
http://www.buypartsby.co.uk/index-log-in.php

Title: Re: LUK flywheel part number
Post by: gazbutS3 on October 23, 2010, 05:20:40 pm

think this is the one I got

415033110

http://www.buypartsby.co.uk/clutch-parts-final.php?year=2008&Submit=Next&make=Audi&model=S3&sub=&eng=2.0000

 :happy2:

Title: Re: LUK flywheel part number
Post by: martziniuk on October 23, 2010, 05:34:48 pm

Thanks, that looks like the one for the S3. The Gti has 3 different flywheels available one I believe is for the ED30 and has the same part number as yours. The other two I aren't sure about.
I rang LUK earlier and asked for the part number for a gti but they needed the last 3 digits from the chassis number, which I don't have cause it's an Octy and they don't supply for Octy's, even though I have checked the hole in the bell housing and sure enough it's a LUK flywheel!!  :confused:

Title: Re: LUK flywheel part number
Post by: martziniuk on October 24, 2010, 12:47:52 pm

Long shot!
Anyone with a 56 or 07 BWA engine code be prepared to pm me the last 3 digits of their chassis and reg number so I could run it by LUK?