MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Technical Workshop => Topic started by: TrickGTI on November 21, 2010, 09:03:35 pm
-
Hey just a quickie any one know the Audi part number for the rs4 fuel pressure reg valve as I rang tps the other day and never got any where they wouldn't do anything without a reg then even with a reg of autotrader they didn't know what one was..... Special.... So if anyone knows it that would help me out alot thanks
Thanks Agen
Trick
-
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2FCupraR%2FUploads_via_Pixelpipe%2Fattachment-FF6PJV-1.jpg&hash=13178b37dece1270beff2050e6059a46d8525f63)
This any good to you mate :happy2:
-
Perfect thank you :smiley:
-
No problem.
Cost me just under £34 from Audi dealer. :happy2:
-
Backdraft Motorsport keep them in stock
http://www.seatcupra.net/forums/showthread.php?p=3191357
-
Oooo nice work if tps fail again I'll give them a call... Thanks
-
32 squids delivered to my garage so a whopping 2 pound trade discount ha every little helps thanks guys
-
Where exactly does this fit and how long of a job is it to replace?
Is it something i could do in the Garage or does it involve stripping half the engine to get at it?
-
Have a look on the link YIN posted up. I have put a few pics up.
-
Hmmm might take a punt on one of these.
You never know it might find my missing 43Bhp :signLOL:
-
got the log tables here from BDM carl, not sure if you have seen them?
http://www.mk5golfgti.co.uk/forum/index.php/topic,21989.msg296244.html#new (http://www.mk5golfgti.co.uk/forum/index.php/topic,21989.msg296244.html#new)
-
Ha well im only on a ko3 and it's the only thing left to do for me... Must be a magic valve :signLOL:
I'm guna fit it tomorrow night so I'll post some pics if that would help???
-
do you have VCDS, would be good to see some logs specifically for the k03
-
yea we have just got it iv not done any logging yet so not to sure how to do that ill have a play and see if i can figure it out tomorrow :smiley:
any adivse on how to do it properly????
-
yes mate, use this website
http://www.goapr.com/support/datalogging.php (http://www.goapr.com/support/datalogging.php)
this tells youhow to get to the right part of VCDS setup and what blocks you need to log. the first lot "round 1 for fuel and boost diagnosis" is the one you want
1 001-1 Engine Speed
2 014-3 Misfire Sum
3 031-1 Lambda, Current Value
4 054-3 Accelerator Pedal Position
5 054-4 Throttle Plate Angle
6 101-3 Injection Timing (Median)
7* 103-1* Current Fuel Pressure*
8 114-4 N75 Duty Cycle
9 115-3 Boost Pressure (Specified)
10 115-4 Boost Pressure (Actual)
11 230-1 Rail Pressure - Specified
12 230-2 Rail Pressure - Actual
-
Nice one yea thats great i shall do that :smiley:
would any other values be usefull for you or anyone one????
-
i did all 4 rounds of logs that they have tabulated and then saved them on the computer. Its handy to look back on and compare should you suddenly get a problem 6 months down the line. also really handy for adding mods at a later date