MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Cosmetic/Interior Modifications => Topic started by: daz5182 on November 22, 2010, 06:30:31 pm
-
Can you have the GT grille and remove the mesh and put the gt slats in? I want to keep the slats as want ti to keep looking liek a derv but like the gti red stripe.....
Any ideas?
Cheers
-
Yes mate no problem.
I was actually running the gti lower honeycombe grilles with the gt main grille for a while.
-
If you are talking about the front grille then the honeycombe cannot be swapped as it's part of the whole assembly. But if your asking if the whole grille is interchangeable then the answer is yes.
-
If you are talking about the front grille then the honeycombe cannot be swapped as it's part of the whole assembly. But if your asking if the whole grille is interchangeable then the answer is yes.
After reading it PROPERLY!! as Greeners RIGHTLY said you cannot have gt slats and the red gti stripe in the main grille.
:ashamed:
-
nightmare! I wanted the red stripe! and GT slats! Bad times.
-
Any thing is possible, if you have both the grilles to hand? Just take the strip out and see how it can be made to fit into the GT grille?
Simples
Darren
-
I've given up mate, hada good look and it looks tricky so gonne leave it...... oh well