MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Edition_30_P on November 28, 2010, 09:45:15 pm
-
Hi Guys!
As above would this fit? Also is there any restrictions in fitting a full tbe milltek from a gti with the 2.75".
Thanks in advance!
Phil
-
not to sure tbh, bear in mind the S3 exhaust might have to be routed around the transmission system towards the rear, the ed30 wouldnt.
-
No it will not fit. I was looking at buying one on ebay and asked AMD and they said it would not fit my MK5 GTI. The DP is the same though.
-
Ok, thanks guys! Would I be ok to run a 2.75" o my ed30 instead of the 3"?
-
Ok, thanks guys! Would I be ok to run a 2.75" o my ed30 instead of the 3"?
Yes mate. Ran one on mine for 30k and was absolutely fine. Made decent RR figures too. :happy2:
-
Cheers, Ron! Would I see better figures from a 3"?
-
Cheers, Ron! Would I see better figures from a 3"?
Not necessarily mate.. In theory, yeah. But I was getting good figures with my 2.75" DP when Stage 1 and 2. Got a 3" now, but went Stage 2+ as well so don't know whether it has made any difference..
-
Thanks again, Ron!! :happy2:
-
I believe if you buy a Milltek DP and sports CAT for the MK5 GTI you get a 3" version. I think this is the only version they do now.