MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: PDT on February 04, 2011, 06:33:20 pm

Title: Help needed coding rns510 and highline
Post by: PDT on February 04, 2011, 06:33:20 pm: Fitted my RNS510 today, all works except 2 things:

On mfsw the up/down buttons dont cycle through stations or tracks
The highline doesnt show any nav or audio options.

Volume, mute etc on the mfsw work perfectly. Any ideas?
Title: Re: Help needed coding rns510 and highline
Post by: 182_blue on February 04, 2011, 06:41:45 pm: What coding have you done ?
Title: Re: Help needed coding rns510 and highline
Post by: PDT on February 04, 2011, 07:00:57 pm: Nothing yet :laugh:
Title: Re: Help needed coding rns510 and highline
Post by: 182_blue on February 04, 2011, 07:16:48 pm: That will be the problem then :laugh:
Title: Re: Help needed coding rns510 and highline
Post by: vRStu on February 04, 2011, 08:20:29 pm: ......... and you expect people to trust you to flash their ECU :stupid:

:evilgrin:
Title: Re: Help needed coding rns510 and highline
Post by: Hedge on February 04, 2011, 08:48:00 pm: Quote from: vRStu on February 04, 2011, 08:20:29 pm
......... and you expect people to trust you to flash their ECU :stupid:

:evilgrin:

:notworthy: :signLOL:
Title: Re: Help needed coding rns510 and highline
Post by: kevinm on February 04, 2011, 08:51:51 pm: After I coded the RNS510, I had to reboot it to show up on the highline.
Title: Re: Help needed coding rns510 and highline
Post by: PDT on February 04, 2011, 10:44:32 pm: Quote from: vRStu on February 04, 2011, 08:20:29 pm
......... and you expect people to trust you to flash their ECU :stupid:

:evilgrin:

I can code, repair and clone most O.E ECU's, fit aftermarket engine management, I have even built many custom made aftermarket ECU systems and we are busy working on some mapping for a car thats in this years BTCC, so ECU mapping isnt a problem.

However getting my highline system working again is baffling me :booty:
Title: Re: Help needed coding rns510 and highline
Post by: rich83 on February 04, 2011, 10:59:37 pm: Have you enabled Navigation in the installations list.
Title: Re: Help needed coding rns510 and highline
Post by: PDT on February 04, 2011, 11:00:55 pm: Not done anything yet, will maybe have a go tomorrow if I get 5 mins. Where will I find the installations list in vcds?
Title: Re: Help needed coding rns510 and highline
Post by: rich83 on February 04, 2011, 11:04:52 pm: Open VCDS, click on 19 Can Gateway, and select the installation button. That should throw up a list of installed features, and youll need to click number 37 - Navigation
Title: Re: Help needed coding rns510 and highline
Post by: vRS Carl on February 04, 2011, 11:06:50 pm: Go into block 19 - Can-Gateway and tick 37 - Navigation

Once that is done you then need to go into block 37 - Navigation and code it to get it to work with highline.

Hardly rocket science and I haven't done any ECU coding for cars in the BTCC or anything else for that matter :booty:
Title: Re: Help needed coding rns510 and highline
Post by: PDT on February 04, 2011, 11:17:43 pm: Thanks richwig :congrats:

Carl, he beat you to it :P
:love:
Title: Re: Help needed coding rns510 and highline
Post by: vRS Carl on February 04, 2011, 11:22:11 pm: My explanation was better though as i reminded you to code the RNS too.

I'm branching out in to Mapping now. If you can map cars but not know how to use VCDS then I will sh*t hot at mapping as i can use VCDS :laugh: :booty:
Title: Re: Help needed coding rns510 and highline
Post by: Top Cat on February 04, 2011, 11:26:21 pm: :grin:
Title: Re: Help needed coding rns510 and highline
Post by: rich83 on February 04, 2011, 11:39:39 pm: Quote from: vRS Carl on February 04, 2011, 11:22:11 pm
My explanation was better though as i reminded you to code the RNS too.

I'm branching out in to Mapping now. If you can map cars but not know how to use VCDS then I will sh*t hot at mapping as i can use VCDS :laugh: :booty:
:booty:
Title: Re: Help needed coding rns510 and highline
Post by: Hedge on February 04, 2011, 11:52:57 pm: Quote from: vRS Carl on February 04, 2011, 11:22:11 pm
My explanation was better though as i reminded you to code the RNS too.

I'm branching out in to Mapping now. If you can map cars but not know how to use VCDS then I will sh*t hot at mapping as i can use VCDS :laugh: :booty:
:signLOL:
Title: Re: Help needed coding rns510 and highline
Post by: PDT on February 05, 2011, 12:07:07 am: Quote from: vRS Carl on February 04, 2011, 11:22:11 pm
My explanation was better though as i reminded you to code the RNS too.

I'm branching out in to Mapping now. If you can map cars but not know how to use VCDS then I will sh*t hot at mapping as i can use VCDS :laugh: :booty:

when you get stuck, feel free to ask for advice :innocent:
Title: Re: Help needed coding rns510 and highline
Post by: vRS Carl on February 05, 2011, 12:09:55 am: Quote from: PDT on February 05, 2011, 12:07:07 am
Quote from: vRS Carl on February 04, 2011, 11:22:11 pm
My explanation was better though as i reminded you to code the RNS too.

I'm branching out in to Mapping now. If you can map cars but not know how to use VCDS then I will sh*t hot at mapping as i can use VCDS :laugh: :booty:

when you get stuck, feel free to ask for advice :innocent:

I will. I'm sure I've got Custard Codes no. somewhere :P
Title: Re: Help needed coding rns510 and highline
Post by: PDT on February 05, 2011, 12:16:09 am: Feed me

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fbarnsdale.files.wordpress.com%2F2009%2F12%2Fcustard.jpg&hash=a0c1bda0d9733ea86b594d6a8474672afafa3926)

:signLOL:
Title: Re: Help needed coding rns510 and highline
Post by: StephenED30 on February 05, 2011, 09:26:55 pm: Don’t know if this helps but this is the coding on mine, will be slightly different as the box for the reverse camera is ticked which will alter the code. Hope this helps.
Address 19: CAN Gateway Labels: 1K0-907-530.lbl
   Part No SW: 1K0 907 530 L HW: 1K0 907 951
   Component: J533 Gateway H07 0052
   Revision: H07 01 Serial number: 100907F1001462
   Coding: ED817F064002020003
   Shop #: WSC 01279 785 00200
   VCID: 3065F88ADAA5

No fault code found.
Address 37: Navigation (J0506) Labels: 1T0-035-680.clb
   Part No SW: 1T0 035 680 C HW: 1T0 035 680 C
   Component: RNS-MID H04 2680
   Revision: AB001001 Serial number: VWZ6Z7J9320057
   Coding: 080100400100001200
   Shop #: WSC 05314 000 00000
   ASAM Dataset: ------------------------- ------
   VCID: 2E59E6F2C091

No fault code found.
Address 56: Radio (J0506) Labels: 1T0-035-680.clb
   Part No SW: 1T0 035 680 C HW: 1T0 035 680 C
   Component: RNS-MID H04 2680
   Revision: AB001001 Serial number: VWZ6Z7J9320057
   Coding: 080100400100001200
   Shop #: WSC 05314 000 00000
   ASAM Dataset: ------------------------- ------
   VCID: 2E59E6F2C091

No fault code found.

:happy2:

MFSW + Highline + RNS 510
Title: Re: Help needed coding rns510 and highline
Post by: PDT on February 06, 2011, 05:27:58 pm: Thanks richwig, vrscarl and stephened30

Got it sorted :happy2: