MK5 Golf GTI
General => Detailing => Topic started by: matsu on March 21, 2011, 11:24:01 am
-
just a quicki
if i fill in and then want to smooth them down a little with ultr fine wet and dry... what the best thing to hand buff the whole area afterwards please
thanks
matsu
-
Autoglym SRP is pretty good for this
If you have access to a DA, a machine polished finish will be far superior.
-
thanks mate
i have that.
i also have poorboys ssr1 swirl remover....if thats any better
and an old tube of red t cut if that will get job done lol- (my dad old car was red)
will be done by hand- havent got a machine or the nerve to trial one out yet
matsu
-
SSR1 carefully applied by hand should work :)
Just be sure to give it a good coat of sealant/wax after you are finished
And to use plenty of soapy water with the wet'n'dry
-
If you can avoid wet-sanding, I would apply several very thing layers of touch-up to the chip over a week or so, if you are careful no wet-sanding or polishing will be required.
-
I tried that approach and you still end up with the visible 'blob'...but i guess its each to their own :happy2:
-
It does try your patience! I've got some to do on mine and will try and post some before/afters.