MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Performance Modifications => Topic started by: heady2010 on May 09, 2011, 07:50:39 pm

Title: milltek downpipe issue.
Post by: heady2010 on May 09, 2011, 07:50:39 pm

hi,
Just bought a second hand milltek decat pipe to go on my golf (k03), but the pipe section after the decat is too big to go on the rest of the original oe system, i was informed this pipe will fit on to my car no problem, can anyone help?
cheers

Title: Re: milltek downpipe issue.
Post by: markymark on May 09, 2011, 08:05:16 pm

Sounds like you need a reducer connection.

Title: Re: milltek downpipe issue.
Post by: bacillus on May 09, 2011, 08:32:58 pm

most likely you got a 3" dp. The standard piping is slightly smaller so like Markymark said, you'll be wanting to get a reducer coupling.

Title: Re: milltek downpipe issue.
Post by: yin on May 09, 2011, 08:37:55 pm

If you have a local powerflow dealer near by they keep them in stock

http://www.powerflowexhausts.co.uk/dealer-locator/

Title: Re: milltek downpipe issue.
Post by: PDT on May 10, 2011, 08:44:27 am

Measure the o/d of the connecting pipe and original exhaust and I can send you something suitable.

Title: Re: milltek downpipe issue.
Post by: Jk911 on June 24, 2011, 06:26:52 pm

You can buy a link pipe direct from miltek, 3" down to 2.75"