MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: liver on May 19, 2011, 09:28:32 pm

Title: Error Codes
Post by: liver on May 19, 2011, 09:28:32 pm

i scanned my golf tonight for fault codes, heres what i found, wonder if anyone can help me rectify them, or state what could be the problem as they mean pretty much nothing to me

Address 56: Radio (J0506)       Labels: 1T0-035-680.clb
   Part No SW: 1T0 035 680 B    HW: 1T0 035 680 B
   Component: RNS-MID       H03 0900 
   Revision: AB001001    Serial number: --------------
   Coding: 040004000400000200
   Shop #: WSC 00066 000 00000
   ASAM Dataset: ------------------------- ------
   VCID: 2D556C16CD81

2 Faults Found:
00856 - Radio Antenna
            007 - Short to Ground
             Freeze Frame:
                    Fault Status: 01100111
                    Fault Priority: 5
                    Fault Frequency: 10
                    Reset counter: 66
                    Mileage: 88736 km
                    Time Indication: 0

01299 - Diagnostic Interface for Data Bus (J533)
            004 - No Signal/Communication
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 62
                    Mileage: 88739 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 16:32:33

thank you

Title: Re: Error Codes
Post by: alexperkins on May 20, 2011, 12:05:48 am

Are you using the proper VW antenna adapter if its retrofitted?

Title: Re: Error Codes
Post by: liver on May 20, 2011, 08:53:48 am

yeah i retrofitted using genuine vw parts for everything that was fitted

Title: Re: Error Codes
Post by: alexperkins on May 20, 2011, 09:14:25 am

that error might have occured from before the adapter was in place. what happens if you clear it?

Did you replace the gateway?

Title: Re: Error Codes
Post by: liver on May 20, 2011, 09:16:08 am

when i clear it they just come back on, cleared them numerous amounts of times now

i don't believe so, litrally just retrofitted nav and gps aerial, its a b version so i didnt get the battery drain

Title: Re: Error Codes
Post by: alexperkins on May 20, 2011, 09:18:21 am

Did you code in 37 - Navigation and check the Long Coding on the RNS to check it wasnt previously coded

Title: Re: Error Codes
Post by: Richn83 on May 20, 2011, 09:48:41 am

I have the:

01299 - Diagnostic Interface for Data Bus (J533)
            004 - No Signal/Communication
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 121
                    Mileage: 47667 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 22:38:13

Had it and some other eroor codes present since installing my RNS not been able to solve them but everything is working so I have ignored them, I am also running an old can gateway with modified firmware so I have put some of this down to that.

Title: Re: Error Codes
Post by: alexperkins on May 20, 2011, 09:51:27 am

Modified software can cause errors - It caused a CAN error on the RNS until I reflashed it up to 3970 when it went away

Title: Re: Error Codes
Post by: danishmkvgti on May 20, 2011, 10:00:24 am

I had errors with RNS and my old gateway, if fitting a new gateway errors will most probably dissappear.