MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: GTIStevie on June 02, 2011, 06:48:01 pm

Title: Fitting pescaras to standard gti???
Post by: GTIStevie on June 02, 2011, 06:48:01 pm

Right just in process of replacing standard monza 2s with pescaras but something don't look right is there meant to be spigot rings on the to fit the hubs properly??

Title: Re: Fitting pescaras to standard gti???
Post by: rich83 on June 02, 2011, 06:50:42 pm

They should fit directly, same hubs.

Title: Re: Fitting pescaras to standard gti???
Post by: apollo13 on June 02, 2011, 06:51:09 pm

Not if they're genuine VW....the centre bore should be fine.

Title: Re: Fitting pescaras to standard gti???
Post by: GTIStevie on June 02, 2011, 06:51:35 pm

Cheers.

Title: Re: Fitting pescaras to standard gti???
Post by: PND on June 02, 2011, 07:11:40 pm

Should fit without any problems, using standard wheel bolts.. shouldn't need anything else..  :happy2:

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2FPND8162%2FGTI%2F007.jpg&hash=0852d2b664aa6e4e81716c7fc257fbb9d681ce90)

Title: Re: Fitting pescaras to standard gti???
Post by: GTIStevie on June 02, 2011, 08:32:02 pm

Job done..

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fmm140%2Fstevieb197%2Ff72f567f.jpg&hash=3b6701f0c635db37d5f3f5885a6efd99f4cdedce)

Title: Re: Fitting pescaras to standard gti???
Post by: Gene Hunt on June 02, 2011, 08:43:08 pm

Good choice,did the same with my ''old'' GTI. :happy2:

Title: Re: Fitting pescaras to standard gti???
Post by: GTIStevie on June 02, 2011, 09:50:16 pm

Will post up pics tomorrow, gotba few to show how bad my monzas were and theyd had a refurb albeit not a good one.