MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: mhurley on June 20, 2011, 05:26:14 pm
-
Hi my Mk5 has got white worm on each of the VW badges
I've seen this set on Ebay
http://cgi.ebay.co.uk/4-PATTERN-WHEEL-CENTRE-CAPS-VW-GOLF-JETTA-EOS-66mm-/220800842263?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3368c17a17
Is this a good price?
Thanks
Matt
-
I bought a genuine set form a dealer for £22.
-
No mate...
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280499394086
I had the same problem, i paid £9 and they arrived next morning! Great service! Really easy to fit too... See:
http://www.mk5golfgti.co.uk/forum/index.php/topic,31103.0/topicseen.html
On how to change them quickly (drillll!!!)
:happy2:
-
I got a set off ebay about 4 moths ago think they were about £10, they were perfect. Just make sure you get the right size, there are two differnt diameters
-
No mate...
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280499394086
I had the same problem, i paid £9 and they arrived next morning! Great service! Really easy to fit too... See:
http://www.mk5golfgti.co.uk/forum/index.php/topic,31103.0/topicseen.html
On how to change them quickly (drillll!!!)
:happy2:
These fit my 18" Monza's
-
Thanks for the info guys
-
Stupid question, but do I have to take my wheels off to put these on?
-
no mate pull the old ones off, I drilled a small hole put a screw in and pulle off with pliers... then push on the new ones.
-
no mate pull the old ones off, I drilled a small hole put a screw in and pulle off with pliers... then push on the new ones.
Thanks, I suppose that's one way of doing it. :happy2:
-
no mate pull the old ones off, I drilled a small hole put a screw in and pulle off with pliers... then push on the new ones.
Thanks, I suppose that's one way of doing it. :happy2:
Its practically the only way without damaging the wheel, whilst on the car, they are in their tighter than a nuns crutch. I replaced some last week, i drilled a hole then used the bolt cover puller thingy madgig to pull them off. :happy2:
-
Used a suction cup to pull my old ones off :happy2:
-
I just drilled through the center of the old cap then once through the otherside just pulled the cap off with the drill bit still in the hole