MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: Eddie-NL on August 13, 2011, 05:11:04 pm
-
Hi
I fitted a rear view camera to a 2006 golf and I have coded it to the RVC low in the RNS but it doesn't bring up a picture when reverse is selected. I have tried my RNS in the car and it works fine. So I'm guessing that it is the firmware on the unit, the guy bought the unit and requested firmware not for battery drain. I have since installed a newer 7N0 Gateway and that made no difference.
Address 37: Navigation (J0506) Labels: 1T0-035-680.clb
Part No SW: 1T0 035 680 C HW: 1T0 035 680
Component: RNS-MID H11 2760
Revision: AB001001 Serial number: VWZ6Z7K8967103
Coding: 080004420200002000
Shop #: WSC 00152 210 91233
ASAM Dataset: ------------------------- ------
VCID: 2E57086CC087
No fault code found.
-
The modified firmware to prevent battery drain doesn't work, I found this in my 05 plate Mk5, so had to refresh the firmware to the normal version of 2760 :happy2:
-
Thanks Steve :notworthy:
I thought is was to do with that, have you got a link to a place I can get the suitable firmware from.
Cheers
Ed
-
http://www.megaupload.com/?d=JG148IV6 (http://www.megaupload.com/?d=JG148IV6) :happy2:
-
You havnt used the kufatec loom have you ?
-
no, I used my own loom. :signLOL:
-
no, I used my own loom. :signLOL:
What's so funny I just asked as the kufatec loom's are faulty and need a few wires swapping round
-
http://www.mk5golfgti.co.uk/forum/index.php/topic,23583.0.html
that's why I put a lol tag on the post.
-
Never seen them so didnt know