MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Toast on March 30, 2009, 08:57:03 pm
-
As above guys what's the standard offset on the Ed30? :confused:
Toast
-
Pretty sures its ET51, could be ET50 though :laugh:
-
Pretty sures its ET51, could be ET50 though :laugh:
ET51
Just looked at one of my spares under the spare room bed!
:happy2:
-
Please tell me burnt bread your new wheels fit ok :scared: :scared: :scared: :scared: :scared:
-
Yeah should be ok had a look at the back of the new rims there Et 48 so think they shoul be fine :happy2: Thinking about putting spacers on the back? What do you reckon?
Toast
-
What width are they :smiley:
-
There are 8.5x19 :jumpmove:
Toast
-
I dont think you need them i make that 15 mil more all ready should look spot on :smiley: :jumpmove:
-
Yeah think they should be ok just having a conversation with my mate about them just now! He reckons I should go for a slight stretch on them but I'm not so sure!! :confused:
Toast
-
Yeah think they should be ok just having a conversation with my mate about them just now! He reckons I should go for a slight stretch on them but I'm not so sure!! :confused:
Toast
You wont need it unless you are going really low in my opinion you will have a little bit of stretch any way with 235's only a bit mind, you could go 225 but it depends how low you plan to go. :happy2:
-
Yeah I'm quite happy with ride height at the mo But if I want lower I may change the H+R's for the Eibach sportline's to get that tad lower look :happy2:
Toast
-
I was gonna ask you what the H&R springs were like too.
-
They ride well Keith sits nice on the 18's and aren't to bouncy :happy2: My mate with the Black s3 is runing them to think his are 45mm so wee bit lower :happy2:
Toast
-
I prev had Eibachs on my leon but they didn't drop the car the way they said they would, H&R get a good write up. looking to go a bit lower
-
My mates the same he's got 30mm Eibachs on his mk2 leon tdi on 18's and it still sits like a roller skate! :laugh: Don't think he bought the sportline versions though! I got the H+R's from Kim Collins at Qst Tuning good service :happy2: