MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: daveangel on September 19, 2011, 06:05:09 pm
-
hey
trying to retrofit a range control module. elsa says it should be behind the passenger dash edge pull off panel (opposite to the fuse board)
i have the 75 degree bracket that hold the module but from the elsa pics cant work out what it bolts onto?
anyone pop a pic up of how the module sits in the side the dash, who has factory xenons please???
thanks
-
Does the range control module come with the autolevelers from kufatec?
-
worked it out. the module fits in a clip on the side of the glove box, not in a bracket as shown on etka
:happy2:
kufatec must be the worst company in the world, forget ebay.
it comes with :-
rear leveller + fixings
front leveller - fixings
control module (second hand)
loom
the loom is too short for a right hand drive car and needs extending for all cecm connections, lights on and power. I asked kufatec to supply some addition wire and connectors to extend the loom. the reply "extend yourself"
there support is awful, but a wiring diagram is available in a thread here somewhere