MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: b21playa on September 29, 2011, 06:25:41 am
-
With carbonio intake, forge twintercooler , miltek sports cat and cat back and superchips. RemAp?
-
Depends whose rollers they go on. Being generous 275ish not so generous 250ish. If its more oomph you want then personally i wouldn't bother with the carbonio intake, i would go for either an evoms, itg or forge twintake as they are meant to give you the better gains. Just remember when you go that far up in power though that you will more than likely have to make other changes to cope with the extra power e.g brakes, suspension, arb's, walk. The lists can be endless, but then thats why we're here . :signLOL:
-
What plugs would be best suited for this?
-
Down you go!!! Slippery slope of modding, it will take over you :signLOL:
-
238 BHP ish . :happy2:
-
238 BHP ish . :happy2:
I have 239.8bhp and 255ftlb with a forge twintake and custom map only. Surely he should see more?
-
I got 215 with 250 torque, neuroses p flo and custom code stage1 mollusk cat back !! :confused:
-
Stick with OEM plugs! Dont waste your money on the carbino intake!! they do zero for performance!!!
-
I got 215 with 250 torque, neuroses p flo and custom code stage1 mollusk cat back !! :confused:
Either the rollers were shockingly inaccurate, or you've been had! :scared:
A stage 1 remap only will typicially yield between 235/40 BHP, stage 2 varies depending on intake and down pipe fitted whether it be sport or de-cat, but ball park figure 260 BHP, then on the 270/80 BHP for stage 2+ with the addition of intercoolers HPFP's etc. but all this is irrelevant imho, figures are for pub talk, real world driving is what counts. :happy2:
-
Quote from: Ducky76 on Yesterday at 12:25:49 pm
I got 215 with 250 torque, neuroses p flo and custom code stage1 mollusk cat back !!
Either the rollers were shockingly inaccurate, or you've been had!
A stage 1 remap only will typicially yield between 235/40 BHP, stage 2 varies depending on intake and down pipe fitted whether it be sport or de-cat, but ball park figure 260 BHP, then on the 270/80 BHP for stage 2+ with the addition of intercoolers HPFP's etc. but all this is irrelevant imho, figures are for pub talk, real world driving is what counts.
I'm going back 2 day see what they say but something not right for 360££
-
Did you get this sorted?
-
Well I've been told it's correct by jbs they had it for a hour rechecked it took it out for a drive and said they don't aggree with rolling road result so basically just drive it , it is faster than before but I did get dv done at same time old one was split so dunno , one thing is sure il not be spending any more money there
-
my standard gti engine is crazy, if it got any faster i swear i would travell back in time, why do you need it faster?
-
Just because :driver:
-
Its all about the area under the curve, you could end up with the same peak bhp of 238bhp but have around 40bhp more power average under the power curve.
I would be happy with seeing around 255bhp-290lbft with a wide torque curve on my dyno with your mods and the sc remap to complement them, then with HPFP and mapping 275-280bhp
The car in the link below aint got huge peak numbers due to power to weight ratio rules, 240bhp 275lbft but the torque band is very wide and holds on to the peak power for a lot longer making this car a rocket and winning races... :happy2: Its running similar engine mods. http://i258.photobucket.com/albums/hh252/Rtechremaps/IMG_0997.jpg
-
Nick, do you have a power graph for the car?
Also, our London branch has a 2.0pd 140 in with hybrid turbo etc... That you mapped, ok to call you tomorrow and run a few things by you?
-
Nick, do you have a power graph for the car?
Also, our London branch has a 2.0pd 140 in with hybrid turbo etc... That you mapped, ok to call you tomorrow and run a few things by you?
You got my number Dave, :wink: I have never mapped a 140PD with hybrid turbo? Done lots of 1.9PD hybrids.
I will try and find the graphs out and post them up.
-
Nick, do you have a power graph for the car?
Also, our London branch has a 2.0pd 140 in with hybrid turbo etc... That you mapped, ok to call you tomorrow and run a few things by you?
Where in London is your branch located? I am only just over an hour away so could be useful.
-
Its all about the area under the curve, you could end up with the same peak bhp of 238bhp but have around 40bhp more power average under the power curve.
I would be happy with seeing around 255bhp-290lbft with a wide torque curve on my dyno with your mods and the sc remap to complement them, then with HPFP and mapping 275-280bhp
The car in the link below aint got huge peak numbers due to power to weight ratio rules, 240bhp 275lbft but the torque band is very wide and holds on to the peak power for a lot longer making this car a rocket and winning races... :happy2: Its running similar engine mods. http://i258.photobucket.com/albums/hh252/Rtechremaps/IMG_0997.jpg
How much to tweak map on the dyno?
-
my standard gti engine is crazy, if it got any faster i swear i would travell back in time, why do you need it faster?
Mate... We always need more power!!
200bhp golf isn't that quick really, and neither is a remapped ed30.... Nissan GTR.. That's a quick car!