MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: MK1Campaign on April 03, 2009, 11:10:58 am
-
Hello to you all as this is my first post.
Ive just sold my Corrado VR6 (previously had MK1 GTI Campaign, MK2 GTI 16v, Leon Cupra R and Golf Rallye) and will be on the lookout for a MK5 GTI soon.
Im swaying more towards an ED30 due to the tuning potential so wondered what the different stages and rough power figures are. Id be interested to hear what hardware people are using too eg exhaust etc
-
Welcome to the forum Ben. :happy2:
You would be correct to pick the edition 30 for the tuning potential.
Its hard to nail down actual figures for the various stages.
But a basic map should give you between 270 and 280
add a turbo back zorst to this and you can add another 10 to 20
a Stage 2 map with zorst will see you well over 300. one of our members on here Greenouse has achieved 325 i think on some very conservative roller's :scared:
after this basic stuff you need to read Jonny C's build thread to capture what is left in a KO 4 he is up around 340 to 360. :evilgrin:
-
Welcome to the forum Ben. :happy2:
You would be correct to pick the edition 30 for the tuning potential.
Its hard to nail down actual figures for the various stages.
But a basic map should give you between 270 and 280
add a turbo back zorst to this and you can add another 10 to 20
a Stage 2 map with zorst will see you well over 300. one of our members on here Greenouse has achieved 325 i think on some very conservative roller's :scared:
after this basic stuff you need to read Jonny C's build thread to capture what is left in a KO 4 he is up around 340 to 360. :evilgrin:
Cheers for the welcome and info Topcat.
I think ill be wanting your front Recaros when i get one :wink:
-
Welcome to the forum Ben. :happy2:
You would be correct to pick the edition 30 for the tuning potential.
Its hard to nail down actual figures for the various stages.
But a basic map should give you between 270 and 280
add a turbo back zorst to this and you can add another 10 to 20
a Stage 2 map with zorst will see you well over 300. one of our members on here Greenouse has achieved 325 i think on some very conservative roller's :scared:
after this basic stuff you need to read Jonny C's build thread to capture what is left in a KO 4 he is up around 340 to 360. :evilgrin:
Cheers for the welcome and info Topcat.
I think ill be wanting your front Recaros when i get one :wink:
there mine :signLOL:
-
Welcome to the forum Ben. :happy2:
You would be correct to pick the edition 30 for the tuning potential.
Its hard to nail down actual figures for the various stages.
But a basic map should give you between 270 and 280
add a turbo back zorst to this and you can add another 10 to 20
a Stage 2 map with zorst will see you well over 300. one of our members on here Greenouse has achieved 325 i think on some very conservative roller's :scared:
after this basic stuff you need to read Jonny C's build thread to capture what is left in a KO 4 he is up around 340 to 360. :evilgrin:
Cheers for the welcome and info Topcat.
I think ill be wanting your front Recaros when i get one :wink:
there mine :signLOL:
They are very nice. Are they factroy fit or the aftermarket Recaro CS?
-
From the factory. :smiley:
-
From the factory. :smiley:
Welcome Ben (another one :smiley:),
As TC has said, different tuners give different results, but with decent software on a ED30 you should see around 300bhp mark from Stage 1, add a TBE (Milltek etc) and then add stage 2 for around 320-330bhp and then there is the stage 2+ that will see 350-60bhp with the addition off uprated fuel pump, Intake and FMIC..
-
From the factory. :smiley:
Welcome Ben (another one :smiley:),
As TC has said, different tuners give different results, but with decent software on a ED30 you should see around 300bhp mark from Stage 1, add a TBE (Milltek etc) and then add stage 2 for around 320-330bhp and then there is the stage 2+ that will see 350-60bhp with the addition off uprated fuel pump, Intake and FMIC..
Jesus stage 2 must be silly quick!
What sort of fuel pumps, intakes and FMIC's are people using to get to these figures?
Is the engine safe with that sort of power?
-
From the factory. :smiley:
Welcome Ben (another one :smiley:),
As TC has said, different tuners give different results, but with decent software on a ED30 you should see around 300bhp mark from Stage 1, add a TBE (Milltek etc) and then add stage 2 for around 320-330bhp and then there is the stage 2+ that will see 350-60bhp with the addition off uprated fuel pump, Intake and FMIC..
Jesus stage 2 must be silly quick!
What sort of fuel pumps, intakes and FMIC's are people using to get to these figures?
Is the engine safe with that sort of power?
Fuel Pumps :- http://www.goapr.com/Audi/products/fsi_fuel_pump.html http://www.autotech.com/prod_engine_fuelinj.htm
FMIC's - S3's / or the forge twin cooler
Intakes are two a penny take your pick - I'd contact JKM regarding all of the above - highly recommended. Engine totally safe expect to change the clutch .... :sad: :evilgrin: (tell me about it !) and a forge DV !
Regards,
Gareth
-
From the factory. :smiley:
Welcome Ben (another one :smiley:),
As TC has said, different tuners give different results, but with decent software on a ED30 you should see around 300bhp mark from Stage 1, add a TBE (Milltek etc) and then add stage 2 for around 320-330bhp and then there is the stage 2+ that will see 350-60bhp with the addition off uprated fuel pump, Intake and FMIC..
Jesus stage 2 must be silly quick!
What sort of fuel pumps, intakes and FMIC's are people using to get to these figures?
Is the engine safe with that sort of power?
Fuel Pumps :- http://www.goapr.com/Audi/products/fsi_fuel_pump.html http://www.autotech.com/prod_engine_fuelinj.htm
FMIC's - S3's / or the forge twin cooler
Intakes are two a penny take your pick - I'd contact JKM regarding all of the above - highly recommended. Engine totally safe expect to change the clutch .... :sad: :evilgrin: (tell me about it !) and a forge DV !
Regards,
Gareth
By the way nice to see a fellow mk1 owner here too !!
-
From the factory. :smiley:
Welcome Ben (another one :smiley:),
As TC has said, different tuners give different results, but with decent software on a ED30 you should see around 300bhp mark from Stage 1, add a TBE (Milltek etc) and then add stage 2 for around 320-330bhp and then there is the stage 2+ that will see 350-60bhp with the addition off uprated fuel pump, Intake and FMIC..
Jesus stage 2 must be silly quick!
What sort of fuel pumps, intakes and FMIC's are people using to get to these figures?
Is the engine safe with that sort of power?
Fuel Pumps :- http://www.goapr.com/Audi/products/fsi_fuel_pump.html http://www.autotech.com/prod_engine_fuelinj.htm
FMIC's - S3's / or the forge twin cooler
Intakes are two a penny take your pick - I'd contact JKM regarding all of the above - highly recommended. Engine totally safe expect to change the clutch .... :sad: :evilgrin: (tell me about it !) and a forge DV !
Regards,
Gareth
By the way nice to see a fellow mk1 owner here too !!
Thanks for the links.
I dont own the MK1 anymore. Sold it to my boss 4 years ago and he has since completely rebuilt it. There was a thread on ED38 but i cant find it now.