MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Performance Modifications => Topic started by: jedi-knight83 on October 11, 2011, 12:48:02 pm
-
Looking for advice on fitting... My local friendly Mech is going to do the work (ex VW guy) but upon seeing the milltek centre section which is about 70mm diameter he thinks it will need some kind of reducing adapted to fit the pipe off the back of the cat which is about 60mm wide. Also need a clamp to go around a 70mm exhaust which local places dont seem to sell.
Any words of wisdom? Do I need to get this reducing pipe or does the milltek clamp closed over the 60mm OEM pipe?
Thanks
-
Ignore this.. Just got through to milltek and they are sending me the 73mm and 63mm clamp and the reducing sleeve which will be with me tomorrow. :) :congrats:
-
Ignore this.. Just got through to milltek and they are sending me the 73mm and 63mm clamp and the reducing sleeve which will be with me tomorrow. :) :congrats:
Interesting, how much did they sting you for that? I have a Milltek down pipe waiting to go on the vRS, but I have the same problem where I need a 70mm to 600mm reducer. I know I can get one on the bay for about a tenner, but I would prefer to get it from Milltek if the price doesn't take the pi55. :happy2:
-
£24 inc vat next day delivery for the 70-60mm adapter and a 63mm and 73 mm clamp which i needed too
I just called milltek on 01332 227280 and they were pretty helpful even though i'd bought it 2nd hand.
-
£24 inc vat next day delivery for the 70-60mm adapter and a 63mm and 73 mm clamp which i needed too
I just called milltek on 01332 227280 and they were pretty helpful even though i'd bought it 2nd hand.
Hmmmm, any chance you could post a picture up when it arrives (particularly the clamps)? The one I got from eBay, when I fitted the GTi back box on the Golf was under £10 including delivery, stainless steel and clamps included.......
-
£24 inc vat next day delivery for the 70-60mm adapter and a 63mm and 73 mm clamp which i needed too
I just called milltek on 01332 227280 and they were pretty helpful even though i'd bought it 2nd hand.
Hmmmm, any chance you could post a picture up when it arrives (particularly the clamps)? The one I got from eBay, when I fitted the GTi back box on the Golf was under £10 including delivery, stainless steel and clamps included.......
sure thing.. it will be here tomorrow...
I looked on ebay but couldnt find anything... TBH though i dont mind having paid the extra as I know it will work and fit etc.
-
£24 inc vat next day delivery for the 70-60mm adapter and a 63mm and 73 mm clamp which i needed too
I just called milltek on 01332 227280 and they were pretty helpful even though i'd bought it 2nd hand.
Hmmmm, any chance you could post a picture up when it arrives (particularly the clamps)? The one I got from eBay, when I fitted the GTi back box on the Golf was under £10 including delivery, stainless steel and clamps included.......
sure thing.. it will be here tomorrow...
I looked on ebay but couldnt find anything... TBH though i dont mind having paid the extra as I know it will work and fit etc.
I can go with that logic, this is the one I got - http://www.ebay.co.uk/itm/220783509427?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_1718wt_1176 - when you go to pay you just enter the size you require, next day delivery. :happy2:
-
Ah... oh well... i'll post a pic tomorrow.
One thing... I presume you have to lose a bit of extra length on the pipe out the back of the CAT when fitting this adapter?
Otherwise with the extra 4-6" length of the adapter the exhaust will sit way too far out the back?
-
Ah... oh well... i'll post a pic tomorrow.
One thing... I presume you have to lose a bit of extra length on the pipe out the back of the CAT when fitting this adapter?
Otherwise with the extra 4-6" length of the adapter the exhaust will sit way too far out the back?
I wouldn't have thought so as this is just a sleeve that sits over the existing pipes.
-
UPS just delivered at 5:35.... too late for me to get it fitted today now :sad1: so will have to wait another day to hear the growling and popping
Anyway here at the pics.. the clamps are good quality and the sleeve ... well thats just a bit of metal piping lol
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2FCar_Stuff%2FGolf_GTI%2FIMG_2718.jpg&hash=bb5faf905a706745866df903ec995194ccf42462)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2FCar_Stuff%2FGolf_GTI%2FIMG_2720.jpg&hash=aac1b540617565afa0beef57657ce93f3304d7da)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2FCar_Stuff%2FGolf_GTI%2FIMG_2721.jpg&hash=131a26ee94147077c7b46b63ce86505f6aded05d)
-
Yeah, clamps are definitely good quality, the ones supplied with mine are like this -
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fwww.apm-supplies.co.uk%2Fimages%2Fproducts%2Fexhaust_clamps.jpg&hash=048b4992e3f037944de03370abd03585d3c72aa3)
They do the job but I will be replacing them with the type you have, tbh I think the whole set up is a tad on the expensive side, having said that the quality will be top notch from Milltek, although I'm a bit confused why both ends haven't got splits in them? Without them the clamp is unlikely to compress the pipe enough to hold it tight. :confused:
Just waiting for the fitted pictures and sound bite........ :popcornsoda:
-
one end on mine goes inside the split end on the end of my centre pipe...hence only one end on the adapter is split
-
one end on mine goes inside the split end on the end of my centre pipe...hence only one end on the adapter is split
So there is a split end on the Milltek part of the exhaust? Both the joining ends I have are solid pipe so I presume that if I contact Milltek and explain my requirements then the pipe I receive will have splits on both ends, with that in mind I think perhaps the 24 quid is actually worth it. :happy2:
Cheers buddy.
-
yes... i didnt actually tell them thats how my exhaust was... i actually thought all exhausts would fit like that so maybe i've been lucky or maybe thats the only one milltek do?
-
yes... i didnt actually tell them thats how my exhaust was... i actually thought all exhausts would fit like that so maybe i've been lucky or maybe thats the only one milltek do?
At a guess they will know the make up of exhaust components, but I will bare that in mind when I ring them tomorrow. :smiley:
-
Slight thread resurrection but I have just got off the phone with Milltek and quite frankly I am a little disappointed! I explained my requirements and they point blank said that they absolutely would not supply an adapter sleeve as in all their literature they state that the dp MUST be married to a Milltek cat back pipe due to exhaust gases backing up and causing premature failure of the catalyst??
I explained that they had supplied the sleeve for your system but the guy said it must have been a one off, and in any case the vRS would be completely different to a GTi because of the routing...... :sick:
Looks like I am going back to eBay!
-
Cant you speak to a supplier and get them to get it for you from milltek?
-
Very odd... They were very helpful when I called and I said to them it was a second hand system... Other route is to find a local Milltek supplier and ask them to order one for you.
-
I have now spoken with Pipewerx, and they are willing to fabricate an adapter for me, based on the quality of their systems I think it will be top quality and it should come in at less than 20 quid. The only issue is how long it will take them as the car is booked in next Wednesday for service and MOT and my mechanic has allocated time to fit the downpipe.
Edit: Adapter now ordered from Pipewerx, 16 quid posted which includes 2 x band clamps. They said they would make it today and get it in the post tomorrow! Happy days.