MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Technical Workshop => Topic started by: Johnny_tro on October 13, 2011, 11:50:55 pm
-
Have them fitted to the car, never seen them wash the lights yet......
How can I check them without plugging the car in? i.e what can I do, to force them out ?
-
They only work if the headlights are on - then they should operate on every fifth manual screenwash.
-
Johnny if they don't work has advised above then check the fuse I think its number 35 or 36 should be a 20a fuse???
Darren
-
was told 5th wash.....done this, looked but nothing.
will go check fuses in next 10min. thanks again ppl :happy2:
Darren < Scary you know these numbers off the top of your head lol if there ANYTHING you don'y know :happy2:
-
:jumpmove: :jumpmove:
:notworthy: :notworthy: < Darren
Working a treat!! Just got a face full of screen cleaner :signLOL: but work a treat now. Was shocked at how long the arms were, put the son in the car asked him to keep pressing it....Booooom nearly had my eye out :happy2:
Thanks again
-
No probs mate, i sorted them for another member the other day, he didn't realise he had them until i said the relay was showing a fault.
I think he was surprised when they jumped out aswell.
Darren
-
Mine werent working the other week was the fuse. When I realised they weren't buggered I took the fuse back out to stop my polished paint been squirted with screen wash every 5 wipes lol
-
:signLOL: I know what you mean, mine are pretty full on. They almost wash the whole front of the car
However, as mine have been used for a while, the front of the car is now filthy < spraying dirty water/muck.
Can I pull/push them out to clean them??
-
I wouldnt force them out personally if thats what you mean?
-
OOooo nooo not planning to. Just wanted to know how can I get them to come out so I can clean them
-
Clean what? if you mean the nozzles then don't they are high pressure nozzles and have a specific spray pattern messing with them can damage how they work.
Best thing to do is take the drivers fog grille off and disconnect the hose and empty the water out of it but to be honest the easiest way is just keep topping the filler bottle up and activating the washers keep running clean water through it.
Darren
-
:happy2: Will do...............
Was just seeing if I could pop them out to give them a general clean. Lack of use they have been firing out crap......but will just keep the water flowing. :smiley:
-
I wouldnt force them out personally if thats what you mean?
Nah, no problemo - how do you think you adjust the spray pattern? :wink: