MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Usual Suspect on November 13, 2011, 04:07:55 pm

Title: Upgrading midline to highline clocks Golf 2007> Changing Board Over
Post by: Usual Suspect on November 13, 2011, 04:07:55 pm

Hi everyone I am going to be upgrading my clocks to the R32 Petrols ones.

I currently have midline clocks on my golf which is a GT TDI 170 DIESEL Mk5 on a 2007 07 plate

My old part number for the midline clocks is 1K0 920 964 B

My new part number for the highline clocks is 1K0 920 974 B

What I want to know is if I can swap the front circuit board out of the highline clocks and put it into the rear of the midline clocks and whether or not if it will work

I have read somewhere that this may be possible And if so should save the headache of having to code the keys clocks to the car.

Has anyone tried this or can give me some insight?

Many thanks

Title: Re: Upgrading midline to highline clocks Golf 2007> Changing Board Over
Post by: Eddie-NL on November 13, 2011, 06:29:40 pm

won't work

Title: Re: Upgrading midline to highline clocks Golf 2007> Changing Board Over
Post by: Usual Suspect on November 13, 2011, 06:40:29 pm

Quote from: Eddie-NL on November 13, 2011, 06:29:40 pm

won't work

Thanks for confirming that. I take it u tried it out already?

Thanks

Title: Re: Upgrading midline to highline clocks Golf 2007> Changing Board Over
Post by: Eddie-NL on November 13, 2011, 06:52:22 pm

Quote from: Usual Suspect on November 13, 2011, 06:40:29 pm

Quote from: Eddie-NL on November 13, 2011, 06:29:40 pm

won't work

Thanks for confirming that. I take it u tried it out already?

Thanks

I haven't tried it but know someone who has

Title: Re: Upgrading midline to highline clocks Golf 2007> Changing Board Over
Post by: mortygttdi on November 13, 2011, 08:52:19 pm

I tried it it does work in a sense that the car will start up but there is no data on the highline, its just a blank red screen :sad1:

Darren

Title: Re: Upgrading midline to highline clocks Golf 2007> Changing Board Over
Post by: Usual Suspect on November 20, 2011, 05:58:26 pm

What program can I use to read SKC code and to code clocks and keys and correct mileage?

Is there a DIY guide for coding the late cluster?

Many thanks