MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: Timvgti on December 31, 2011, 09:48:33 am
-
Guys,
I've done a lot of reading about the o.e.m. carkits, working with the rns510, but it is still not clear to me.
Can you guys help me out?
What I have:
- VW Golf mk5 GTI, no phone preparation, 06-2005, original 6CD-changer, no MDI/Aux connectors
- Small mfa, but planning to retrofit a mfa+ (already have vcds and vagcommander cables and software for it)
- buttons on mfsw, but I have the 'old style' buttons (without the 'star' but with phone hangup and pickup buttons)
- Rns 510 original B version with firmware fw2760 and V8 maps
What I want:
- Bluetooth connection to my iPhone 3GS and future 4S or 5 (?)
- Full control of phone on my rns510 (dial, phonebook, etc)
- information also visible on mfa+ (once I have retrofitted one)
What I want, but not required:
- Pickup / Hangup with buttons on mfsw (will it work with 'old style buttons'?)
- Voice control of rns510 (will it work with fw2760? And I've read something about an extra microphone?)
- Original VW microphone in o.e.m. location (in compartment where the sunglass holder and the reading lights are)
- A2DP to stream music from iPhone to Rns510
Extra questions:
- What is 'Rsap' and do I need it?
- what models are working? 9w2, 9w3, 9w7, 9wz?
- what is meant with abbreviations like: 7P6, 3C8, 5K0, etc?
- What vcds coding is needed in my situation?
- Better to look for a Kufatec Fiscon Basic Plus?
- I'm looking for a complete kit, so with wiring-loom, controller, mic, etc. So plug&and play?
- If I choose a model that is only for 'white dot mfa', so nothing shows up on a red mfa+, will I still be able to pair/set/control it using the rns510?
Pages I have read:
- http://www.myturbodiesel.com/1000q/a5/VW-bluetooth-FAQ.htm
- http://www.vwwatercooled.org.au/forums/f78/summary-bluetooth-options-rns510-rcd510-31461.html
- http://www.mk5golfgti.co.uk/forum/index.php/topic,39739.0.html
Thanks,
Tim
(The Netherlands)
-
To get this: -
What I want:- Bluetooth connection to my iPhone 3GS and future 4S or 5 (?)
- Full control of phone on my rns510 (dial, phonebook, etc)
- information also visible on mfa+ (once I have retrofitted one)
You need either the 729B oem skoda kit or one of the aftermarket kits like the Kufatec fiscon :happy2:
What I want, but not required:
- Pickup / Hangup with buttons on mfsw (will it work with 'old style buttons'?)
- Voice control of rns510 (will it work with fw2760? And I've read something about an extra microphone?)
- Original VW microphone in o.e.m. location (in compartment where the sunglass holder and the reading lights are)
- A2DP to stream music from iPhone to Rns510
Don't believe the pick-up/hand-up button will work with any of the kits.
No extra mic required when using the OEM kits for VC of the RNS just depending on the type of loom you have it might require re-routing via the back of the RNS. Most I have seen now a days are pre-wired for VC.
Both OEM and Fiscon can now have the mic in the OEM location (fiscon offer this as an optional extra now).
A2DP will only be available on the Fiscon kit and not the 729B kit.
-
Pickup/hangup via the MFSW works perfectly on my kufatec fiscon basic+ handsfree
-
And what about prices?
729B (this is called a Skoda unit?) and Fiscon Basic Plus models more expensive?
@ ALEXPERKINS: Pickup/hangup works? I have the 200.5 buttons:
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fwww.myturbodiesel.com%2Fimages%2Fa5%2Fbuyg%2Fmfswbutton.jpg&hash=de8688583140662fb6c1bcbf4c80bf83eb89adab)
-
I can't see why they wouldn't work with the fiscon kit, but its possible there may be issues
729B is harder to get hold of now, and can be quite pricey.
Fiscon basic plus is about £280
-
I can't see why they wouldn't work with the fiscon kit, but its possible there may be issues
Do you have the same style mfsw buttons or newer style?
Would it be possible to place a set of new style mfsw buttons? (Or is a new can gateway also needed?)
-
I have the newer style buttons in mine buddy
It is possible to replace, but you may need a new steering controller - someone else will confirm I'm sure! :happy2:
-
Having just gone through this excercise and eventually settling on the 5N0 kit, this is what I have discovered. I might be completely off base on some of the answers, but this is to the best of my knowledge and research I have done.
What I want:
- Bluetooth connection to my iPhone 3GS and future 4S or 5 (?)
Get one of the newer kits if you want to future proof, or the Fiscon which allows updates.
- Full control of phone on my rns510 (dial, phonebook, etc)
All of them will do that
- information also visible on mfa+ (once I have retrofitted one)
Only the older 729B will do this, and the Fiscon units.
What I want, but not required:
- Pickup / Hangup with buttons on mfsw (will it work with 'old style buttons'?)
As far as I am aware, they will work
- Voice control of rns510 (will it work with fw2760? And I've read something about an extra microphone?)
No idea
- Original VW microphone in o.e.m. location (in compartment where the sunglass holder and the reading lights are)
If you want that, then you will only be able to do that with an OEM kit. The Fiscon has an external mic. I know they do an OEM style mic for extra money, but from what I have read, it's not good at all
- A2DP to stream music from iPhone to Rns510
Then you want one of the newer kits or the Fiscon, the 729B doesn't do A2DP
Extra questions:
- What is 'Rsap' and do I need it?
Rsap is for reading and writing sms or text messages. Will not work with the Iphone, so no, you don't need it
- what models are working? 9w2, 9w3, 9w7, 9wz?
They should all work
- what is meant with abbreviations like: 7P6, 3C8, 5K0, etc?
No idea about the codes, but in terms of age, it goes: 3C8, 7P6, 5K0 from what I have read, but could be wrong. I just went with the newer one, which I believe is the 5N0
- What vcds coding is needed in my situation?
The BT will need to be coded in using VCDS
- Better to look for a Kufatec Fiscon Basic Plus?
I didn't go with this due to the price and the main stumbling block of the OEM mic location. I got the OEM 5N0 for £180 vs £330 the cheapest I found for the Fiscon
- I'm looking for a complete kit, so with wiring-loom, controller, mic, etc. So plug&and play?
Most if not all the kits will be plug and play with all you need, just check them properly.
- If I choose a model that is only for 'white dot mfa', so nothing shows up on a red mfa+, will I still be able to pair/set/control it using the rns510?
Yes, the only thing you will not have is the phone display on the MFA / MFA+
Pages I have read:
- http://www.myturbodiesel.com/1000q/a5/VW-bluetooth-FAQ.htm
- http://www.vwwatercooled.org.au/forums/f78/summary-bluetooth-options-rns510-rcd510-31461.html
- http://www.mk5golfgti.co.uk/forum/index.php/topic,39739.0.html
Thanks,
Tim
(The Netherlands)
-
- information also visible on mfa+ (once I have retrofitted one)[/i]
Only the older 729B will do this.
Not true - the fiscon kits work with the MFA display.
-
- information also visible on mfa+ (once I have retrofitted one)[/i]
Only the older 729B will do this.
Not true - the fiscon kits work with the MFA display.
Yeah, sorry, left that one out. Was only thinking of OEM's due to him wanting the OEM speaker location. Post updated. Same as the A2DP, Fiscon also does this.
-
WoW! Thanks for al the helpfull answers.
@Squeeguk: You're saying that all new models will work (except on the red mfa offcourse), but I've read something about a pairing problem: on models like the 3C8 (and others?) you need the (white) mfa to make the BT vissible and to pair the devices.
On other models (7P6?) the pairing goes using only the phone.
Is this true, or is it also possible to turn on vissibility on rns510 and connect/pair?
-
From what I understand, if you don't have the 510 or the MFSW then that is the case, the phone is only visible for the first 10 seconds or something. Otherwise with the 510, you should be able to pair all the kits. I am sure someone will be along to correct me if I am wrong, lol.
-
WoW! Thanks for al the helpfull answers.
@Squeeguk: You're saying that all new models will work (except on the red mfa offcourse), but I've read something about a pairing problem: on models like the 3C8 (and others?) you need the (white) mfa to make the BT vissible and to pair the devices.
On other models (7P6?) the pairing goes using only the phone.
Is this true, or is it also possible to turn on vissibility on rns510 and connect/pair?
In general most units with rsap are not visible at all unless you start pairing via the highline display (BAP/white led dash only)
For example if you fit 5N0035730D rsap/uhv unit to the MK5 it is visible in the RNS510 but impossible to pair your phone.
If you were to fit 7P6035730B uhv only unit then you can pair normally from your phone.
HTH
-
Thanks for the info Kalu. So I have ordered the 5N0 and I have the red display. I was advised that it would all work and be fine. How would I go about pairing now? With the 10 second window on startup?
Seems like I should have go the 7P6 then? I was advised the 5N0 was the newer unit and the better one to go for.
-
Earlier revisions of the 5N0 may let you pair without the White Highline, I only tried it with the D version myself...
If you have a D, then you wont be able to pair it at all :(
-
Bummer, that is the exact one that is on it's way to me. Guess I better get in touch with the company then. Anybody want a 5N0035730D?
So I am better off going with the 7P6 with my iphone 4 and the red display? This will then allow me to pair with the phone from the 510 right?
-
Yes I have 7P6035730B and works fine with my iPhone 4S, RNS510 and red highline.
I also first bought the 5N0 unit as it was the newest at the time, you shouldn't have any trouble selling it to a MK6 owner.
-
Mmmm, thanks for the info. It seems they only have the 7P6 035 730F. Would this be ok?
Sorry Tim for hi-jacking your thread, but this is all good info, lol.
Meant to add Kalu, could you not even pair it from the MFSW?
-
Mmmm, thanks for the info. It seems they only have the 7P6 035 730F. Would this be ok?
Sorry Tim for hi-jacking your thread, but this is all good info, lol.
Meant to add Kalu, could you not even pair it from the MFSW?
I did get it to pair by fitting temporarily a white led dash from a MK6.
After the phone had been paired once it will remember the device.
However this is hardly an ideal solution!
About the 7P6035730F, I have no personal experience with this unit.
-
Apologies, but I seem to have got my wires crossed, the 3C8 is newer than the 5N0, with production started in week 22, 2011. Bummer, that's the problem trying to understand someone else typing English from a foreign language, lol.
Well seems like I need to sell the 5N0 then and re-order a 3C8.
Kalu, do you know if that will pair fine through the RNS?
-
Sorry Tim for hi-jacking your thread, but this is all good info, lol.
No problem!
It's good to know that indeed not al new models are working, looking at the pairing-issue!
Yes I have 7P6035730B and works fine with my iPhone 4S, RNS510 and red highline.
I also first bought the 5N0 unit as it was the newest at the time, you shouldn't have any trouble selling it to a MK6 owner.
So your 7P6 is also vissible in the mfa+(red highline)?!?
-
Yes I have 7P6035730B and works fine with my iPhone 4S, RNS510 and red highline.
I also first bought the 5N0 unit as it was the newest at the time, you shouldn't have any trouble selling it to a MK6 owner.
So your 7P6 is also vissible in the mfa+(red highline)?!?
[/quote]
No sorry for confusion, it doesn't display anything on the red highline, just the RNS510. I just meant this is the setup I have...
-
Thanks!
So 7P6 is the best option for us mkv owners with rns510 and new model phones (doesn't matter if you have small or large mfa. On both nothing visible)
Not 3c8 or 5N0...
-
For anyone wanting the 1Z0 035 729 B this is the cheapest place for a new kit that I know of, £331 delivered.
http://www.ebay.co.uk/itm/VW-BLUETOOTH-iPHONE-PREMIUM-NOT-FISCON-1Z0035729B-/170462597451?pt=UK_Holders_Mounts&hash=item27b05cd14b
Also spotted this but doesn’t say about it been the B version, may be worth someone enquiring.
http://www.ebay.co.uk/itm/VW-Golf-Mk5-Skoda-Bluetooth-Kit-1Z0-035-729-/220884549192?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item336dbebe48
:happy2:
-
The 7P6 has now been replaced by 5K0 but from my understanding they are identical, so nothing on mfd unless it's white or colour screen but everything it works and pairs on the RNS.
5N0's you need the mfd to pair but they only work with white mfd. don't know about 3c8's.
-
The 7P6 has now been replaced by 5K0 but from my understanding they are identical, so nothing on mfd unless it's white or colour screen but everything it works and pairs on the RNS.
5N0's you need the mfd to pair but they only work with white mfd. don't know about 3c8's.
Does this mean the 7P6035730F should work? Will all the 7P's work the same?
-
The 7P6 has now been replaced by 5K0 but from my understanding they are identical, so nothing on mfd unless it's white or colour screen but everything it works and pairs on the RNS.
5N0's you need the mfd to pair but they only work with white mfd. don't know about 3c8's.
Does this mean the 7P6035730F should work? Will all the 7P's work the same?
From what I've read the 7p6 should work fine and not read anything about them needing to be a certain revision and they are now superseded by the 5k0's..
Here's my thread where I've basically been going through the same
http://www.mk5golfgti.co.uk/forum/index.php?topic=39739
-
Why is there an extra GSM ANTENNA included on some models?
On 7P6 I don't see the extra connector/antenna, but for example on 3C8 modules, there is:
7P6:
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fwww.carsystems.pl%2Fimg%2Fproducts%2F21%2F9%2F12_max.jpg&hash=f5cd6a525a955d8a7e019e5a66e2df3f90ffef24)
3C8
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fwww.carsystems.pl%2Fimg%2Fproducts%2F21%2F3%2F13_max.jpg&hash=4a2ad34871d715f4b20ef11fd6049f9f90c22274)
-
When connected in rsap profile the phone is asleep hence the phones internal antenna is not used.
This is why the bluetooth unit has its own antenna.
When connected in UHV profile the phone aerial is used.
On UHV only units the extra antenna is not required and therefore not fitted.
-
The 7P6 has now been replaced by 5K0 but from my understanding they are identical, so nothing on mfd unless it's white or colour screen but everything it works and pairs on the RNS.
5N0's you need the mfd to pair but they only work with white mfd. don't know about 3c8's.
Does this mean the 7P6035730F should work? Will all the 7P's work the same?
Hi mate my 7P6 pairs with my iphone 4 no problem(SE phones as well)NAV displays on highline and bluetooth audio also displayed in audio mode in the highline.
-
Hey Lee
I got my kit today, at last, the right one, 7P6. Now you mentioned something somewhere about having problems with voice control and I cannot find that anywhere now. You also said something about plugging into the RNS. Now the harness I have has 2 loos white plugs which look like they come from the plug that goes into the back of the radio. Do I disconnect the white plug for the antenna from the white plug near the module and plug it into one of the plugs on the radio plug?
What do the other two white plugs do then? Do they plug into each other?
-
Hope its all sorted now buddy. :happy2:
-
All installed thanks bud. :happy2:
-
I would also like to know which BT kit is apropriate fro me.
I have a 2008 gti edition 30 with RNS 510 version C.
My Can getaway is : 1K0 907 530L.
I found 1K8 035 730 Genuine VW Bluetooth Control Unit with software: 2300
and 3C0 035 729 G Genuine VW Bluetooth Control Unit with software: 7109 on german ebay.
Will the fit my car?
What else do i have to buy? Microphone? :confused: