MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Technical Workshop => Topic started by: Phil Miller on January 29, 2012, 01:29:17 pm
-
Hi all, now for a while my airbag light has been on, so i took a full scan and here is what its said
Address 15: Airbags Labels: 1K0-909-605.lbl
Part No SW: 1K0 909 605 D HW: 1K0 909 605 D
Component: 02 AIRBAG VW8 022 0600
Revision: 05022000 Serial number: 0033JD0B6JZN
Coding: 0012338
Shop #: WSC 01268 785 00200
VCID: 2D550D87CD81
2 Faults Found:
01218 - Side Airbag Igniter; Passenger Side (N200)
001 - Upper Limit Exceeded - Intermittent - MIL ON
00589 - Airbag Igniter 1; Passenger Side (N131)
002 - Lower Limit Exceeded - Intermittent - MIL ON
now ive read on here about having to cut the plug off under the seat and solder the wires together, but my n/s/f seat has already been done, could this be the plug where the loom joins the car loom? and help would be great
-
Do they clear and come straight back on again?
-
It may be the seat to floor plug. take it you cleared the fault after doing the mod?
Have you done any mods up behind glovebox at some point to disturb those plugs?
-
Do they clear and come straight back on again?
Yes mate they come straight back on, the main thing is the ding on the dash on start up, that bugs the hell out of me
-
It may be the seat to floor plug. take it you cleared the fault after doing the mod?
Have you done any mods up behind glovebox at some point to disturb those plugs?
The mod was done before i had the seats, i fitted them about a year ago and they have been spot on until christmas time, havent been behind the dash either
-
Just quickly Googled it and seems to point to the dash airbag, maybe take out glovebox and check the contacts on the plug above it?
I hate that BONG on startup, did my head in when I put the other seats in.