MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Performance Modifications => Topic started by: dan930 on February 04, 2012, 02:43:56 pm

Title: milltek exhaust
Post by: dan930 on February 04, 2012, 02:43:56 pm
was wondering if the milltek system is loud as I don't want a loud exhaust,just a tiny bit louder then the oem edition30 exhaust is ok...will be connecting it to a milltek sportscat&downpipe...
Title: Re: milltek exhaust
Post by: xht20 on February 04, 2012, 03:28:12 pm
Get the resonated catback and you will be satisfied  :happy2:
Title: Re: milltek exhaust
Post by: Carrera2RS on February 04, 2012, 07:11:03 pm
Hi

I found the resonated a little too quiet and changed to the non resonated. If you find a little resonance inside the cabin you can add insulation in the boot.
Title: Re: milltek exhaust
Post by: maxload on February 04, 2012, 07:25:22 pm
I have a miltek non res and it is prefect.
It's just a little more throaty than the oem zorst but not too over loud. The latest edition miltek has ajustable tips as well so you can set it up exactly as you like  :happy2:


 
Title: Re: milltek exhaust
Post by: dan930 on February 05, 2012, 12:06:02 pm
I have a miltek non res and it is prefect.
It's just a little more throaty than the oem zorst but not too over loud. The latest edition miltek has ajustable tips as well so you can set it up exactly as you like  :happy2:


 

went on the milltek website but it doesn't mention it
Title: Re: milltek exhaust
Post by: Tfsi_Mike on February 05, 2012, 12:30:36 pm
I have a miltek non res and it is prefect.
It's just a little more throaty than the oem zorst but not too over loud. The latest edition miltek has ajustable tips as well so you can set it up exactly as you like  :happy2:


 

I have full miltek non res and it sounds ace! Not too loud.  Only loud ('too loud') when rear seats are folded down and parcel shelf out together.

When on boost from the outside it sounds evil
Title: Re: milltek exhaust
Post by: maxload on February 05, 2012, 02:53:04 pm


went on the milltek website but it doesn't mention it

If you look at this pic you can see the clamps to enable you to adjust it. At this stage I hadnt adjusted it so the clamps are visible. If you push the tips in flush with the rear valance you cant see them , which is a nice touch

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fz412%2Fmaxload2010%2FPA220037.jpg&hash=d52870d5e782ebb08a3ec2e4f12f79aece429cd3)

Another pic just for the sake of it

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fz412%2Fmaxload2010%2FPA220038.jpg&hash=b7217a89d7e7a1429221711d68c7b5ef27687d99)
Title: Re: milltek exhaust
Post by: GNJ_Motorsport on February 07, 2012, 01:23:09 pm
I have the non resonated system on my S3 and I love it. Not too loud really when driving normally but it sounds so good from outside when you give it some  :laugh: