MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: SeanB on February 08, 2012, 04:52:13 pm

Title: Adjusting Sat Nav (RNS510) on the move
Post by: SeanB on February 08, 2012, 04:52:13 pm

Hi Guys,

Is there anyway of 'fixing' my Sat Nav (RNS510) on the move?

Currently as soon as I try to enter a new destination while the car is moving, it just gives me a warning and doesn't let me enter anything.

Thanks,

Sean..

Title: Re: Adjusting Sat Nav (RNS510) on the move
Post by: Eddie-NL on February 08, 2012, 05:41:43 pm

This is due to coding, if you have vag com untick the box that disables it.

Title: Re: Adjusting Sat Nav (RNS510) on the move
Post by: vRS Carl on February 08, 2012, 05:44:27 pm

As Eddie says it's the coding.

In VCDS in the last bit you need to remove the tick in the "Speed Threshold destination input" (or along those lines) byte

Title: Re: Adjusting Sat Nav (RNS510) on the move
Post by: SeanB on February 09, 2012, 10:07:54 pm

Doh!!

Must invest in VAG COM. Does it come with instructions, because all the codes and stuff look pretty complicated.

Where is the best place to buy it?

Title: Re: Adjusting Sat Nav (RNS510) on the move
Post by: Naresh on February 15, 2012, 01:12:47 pm

Surely that's dangerous anyway to enter a destination whilst driving.

Title: Re: Adjusting Sat Nav (RNS510) on the move
Post by: Deako on February 15, 2012, 01:38:42 pm

Quote from: Naresh on February 15, 2012, 01:12:47 pm

Surely that's dangerous anyway to enter a destination whilst driving.

Not if your passenger is doing it.