MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: G-Lader on February 23, 2012, 06:14:41 pm

Title: Milltek R32 back box on 140 TDi??
Post by: G-Lader on February 23, 2012, 06:14:41 pm

Hi,

I have an R32 rear bumper sitting waiting to go on.
Would a Milltek rear box physically fit up against the TDi floor pan and match up with the exhaust hangers??
Would the rear box sit lower??

I understand the complete system wouldn't fit due to the 4WD configuration but was thinking if the rear box fitted up okay I would get an exhaust manufacturer to fabricate the pipework from the downpipe to the milltek box......

Has anyone tried this or seen both systems on the ground to compare??

Thank you!  :party:

Title: Re: Milltek R32 back box on 140 TDi??
Post by: G-Lader on February 24, 2012, 11:39:19 am

Anyone?? :sad1:

Title: Re: Milltek R32 back box on 140 TDi??
Post by: Gazzgti on February 24, 2012, 12:10:07 pm

Is it a Miltek R32 back box or a Miltek R32 style back box?

Title: Re: Milltek R32 back box on 140 TDi??
Post by: G-Lader on February 24, 2012, 12:16:56 pm

It's a Golf R32 (4WD) back box.

Title: Re: Milltek R32 back box on 140 TDi??
Post by: Gazzgti on February 24, 2012, 01:33:14 pm

Dont think it fits mate micht be able to get one of the custom places to adapt it though.

Title: Re: Milltek R32 back box on 140 TDi??
Post by: G-Lader on February 24, 2012, 05:50:58 pm

 Think I'll get some measurements to compare the boxes.
I know the pipe into the R32 box will need modified to suit, fingers crossed the R32 box isn't deeper.......
Time will tell!

Thanks!