MK5 Golf GTI
General => Detailing => Topic started by: benjii on February 24, 2012, 09:54:38 pm
-
bet you get this alot i want to get a machine polisher to get rid of all the marks and scratches just wondering what products for what stages and pads and is it easy to do or can you muck it up and ruin your paint work
-
where you from?
3 months on buddy - I've just got to grips with a basic detail
I will give you the same advise I got from the pro's on here..........get it done by a detailer!!
- Buyer a machine polisher is the easy part
- Then there are 100's of different polishes available, depending on the colour, paint type how bad it is etc.
- Then, there are 100's of different pad types for the polisher, depending again on the polish, car....and how bad the paint is.
You will need a DEPTH reader (something like that) the will read the depth or paint, so you know how much polishing you can do........
BIG ONE < Skills
Unless you know what your doing you will f**K it up big time.....wrong pads/wrong polishe and you will make it worse even strip of tooo much laquer.
What polish? what pads? how much pressure to you.........mind field!
Have it detailed < then maintain it yourself.
The cost of machiner polisher, pads, polish etc. will cost the same as a detail, if not more!!
:happy2: This is just my opinion. Its not as simple as I first though.
-
Lol Johnny's beaten me to it. I'd always recommend getting the car done by a pro so that you have an excellent base to work on whilst you research products and techniques.
It's veh easy to blow £200-300 on polishing stuff and then getting bored by it. However, if you really want to go for it then you need to invest time, money and energy. Start off with a dual action polished which is safer than a rotary polisher. Get a kit with pads and polishes included. Buy a scrap panel and try things out. Get used to the polisher and how to break down polishes properly.
Look at online retailers for polishers - elitecarcare, washshop, cleanyourcar etc.
There's a few guides on DW about polishing.
-
If you really want to know whats involved get yourself joined up to detailing world.com and get yourself booked on one of the sponsors open/training day. About 45quid you'll spend most of your day practising on body panels using Dual action and rotary machine polishers using different polishes, techniques etc. Realisticaly, you'll only machine polich your car twice a year? Correct me if im wrong? :rolleye: The amount of money you'll spend on a machine polisher and various products your half way there to paying for a paintwork enhancement detail. For an outlay of 40 odd quid you'll see if its for you or not. Good luck!
-
thanks for all your replys think ill get a pro to do it as it really needs doing im in sussex and there few companys that do it. ill have a look at detailing world as would not mind getting to know how to do it. thanks again for the help :drinking:
-
Taking cover.....
But it's not that difficult. IF you read a lot on Detailing World etc. Ask the right questions (take some answers with a pinch of salt sometimes. Most are very helpful & useful)
Practice on a panel from a breakers if u are still worried (try get a panel similar to your car colour make etc)
Start with the least abrasive polish & pad. Be amazed at the results.
Good DA starter kits from £130ish new....
No where near as scary as most make out.
-
Taking cover.....
But it's not that difficult. IF you read a lot on Detailing World etc. Ask the right questions (take some answers with a pinch of salt sometimes. Most are very helpful & useful)
Practice on a panel from a breakers if u are still worried (try get a panel similar to your car colour make etc)
Start with the least abrasive polish & pad. Be amazed at the results.
Good DA starter kits from £130ish new....
No where near as scary as most make out.
Totally agree!:
Purchased this last week http://www.cleanyourcar.co.uk/polishing-machines/das-6-pro-dual-action-polisher/das-6-pro-dual-action-polisher-menzerna-kit/prod_675.html
Must say results are fantastic on my wifes Dark blue Mini and my Red Golf Gti!
Go for it!
-
Agreed it's not difficult but I've seen people play £200-300 for everything, have one or two goes and then give up. If you have the time, money, effort and space for it, I agree - go ahead!
Remember to read through a decent guide like this one: clicky (http://www.detailingworld.co.uk/forum/showthread.php?t=63859)
With a DA, it's more difficult to go wrong (but not impossible). I used a Menzerna Final Finish with a Finishing pad on a G220 machine straight on my Golf GTI without any prior experience. I just took my time, made sure the pad didn't dry or overheat, and made sure the polish was thoroughly broken down before moving on to the next section. Took me the best part of six hours.
-
Round here you seem to be looking at £500ish for a machine polish so DIY has got to be cost effective. Second hand DA's don't seem to loose much money and are in demand it can easily be punted on if you get bored.
-
Surely that depends on what you're after? An enhancement detail would be in the £150-300 price bracket and I'd expect £500+ for a full on correction, which you wouldn't do without a paint depth guage.
-
Be ware of used DA polishers. If they have had heavy use bearings can go.
I would also go for a decent make. Kestrel & CYC seem to be highly regarded.
As with anything in life the professional (detainers) will be able to do a better job in less time.
But finding a good detailer in your area isn't easy and for my 2pence worth.
Even after a full correction your car won't look it's best after the first bit of rain.
It is amazing however, it easier to keep up to a well prepared car. Until you have had your car detailed you simply won't understand.
Prepare to be amazed.
-
I'd wanted to have ago with a polisher but like you I was worried I'd cock it up. It took me weeks of research on Detailing World and YouTube but in the end I bought a DAS 6 pro kit with the menzerna polish and sonus pads. I knew it was something I wanted to learn and was willing to persist.
I struggled to achieve results at first and it took probably 3 or 4 goes on different panels before I got it sorted. Since then I've done another 5 cars with equally good results.
If you really are willing to persevere then I would go for it. A pro will do a better job as they are always going. To have better skills but the satisfaction you get from correct ting the paint isworth the investment in my opinion.. Just be aware that your unlikely to achieve perfect results without a paint gauge as you don't know how far you can go. You can still remove the vast majority though.
-
ok think im gonna go get a scrap panel as people have said and have a go :evilgrin: whats the safest pad and polish to go for or any steps they do
-
The least aggressive for each!
-
Yep
Then step them up.
Next pad up still with the least cut polish.
Finish with a finishing pad & finishing polish.
Don't forget to seal & wax after.
Take your time
-
ok think im gonna go get a scrap panel as people have said and have a go :evilgrin: whats the safest pad and polish to go for or any steps they do
Might be worth getting a vw panel as paint on the golf is pretty hard, that's why I bought the Menzerna kit. As previous posts start on the least aggresive combination and move up. The scratches you are removing are not in the paint but in the clearcoat ontop. If you get paint on your pad you have gone to far!
-
Surely that depends on what you're after? An enhancement detail would be in the £150-300 price bracket and I'd expect £500+ for a full on correction, which you wouldn't do without a paint depth guage.
Unfortunately this is an expensive part of the country to live in
http://www.polishedbliss.co.uk/acatalog/detailing-services-service-options.html
Correction is £800 plus!
-
Depends on who you use. Polished bliss are a big name these days and so you can expect to pay top dollar. There may well be smaller companies/individuals who can help out.