MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: grantvw24 on March 28, 2012, 04:18:51 pm
-
well guys found my 07 gti was not pulling like it should so replaced the diverter valve. what a difference it made pulling in every gear totally different car, and fuel econemy was a lot better.
Got back in car today and does not seem to be pulling the same. Kind of takes the fun out of the car when it dosen't drive like u know it should. Any Guys got any ideas why it could be a hit or a miss?
-
May be check that a fitting has not come loose when you replaced the DV. You could always see which member with a copy of VCDS is near you and ask them to scan for fault codes and log a couple of runs, to check ofr other faults
-
Was looking through the big write up there on the DV and it mentioned clearing codes with Vag. Guess i missed that bit. Anybody in scotland, east coast by any chance?
-
This section of the forum has a list of members with VCDS :happy2:
http://www.mk5golfgti.co.uk/forum/index.php/topic,120.0.html (http://www.mk5golfgti.co.uk/forum/index.php/topic,120.0.html)
-
Was looking through the big write up there on the DV and it mentioned clearing codes with Vag. Guess i missed that bit. Anybody in scotland, east coast by any chance?
Golfman (Scott) in Dundee :happy2:
-
Cheers for that Nicky boy