MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: Smudgster on May 09, 2009, 05:10:35 pm
-
Im looking to run a power cable from battery to the boot to power an amplified Infinity Baselink. I had a quick look today and at first glance i couldnt see and easy wasy from engine bay into the passenger compartment. Anyone out there with some tips and tricks or howto's???
Thanks
Smudgster
-
i read some where,if you take the battery out you can see a gromet in the bulk head
-
i nearly put up a post like this but i just figured it out myself.
basically...take out the battery...and you can see the grommit that goes thru the bulkhead. take out the glovebox too and you can see where the cables come thru. then you can wire the cable to the boot under the sills! ;)
-
thanks both all snorted now
-
Guys,
have you got power, speakers and RCA down one side? Any issues?
-
if you run all the cables down the same side you will get interference.You need to put the power cables down one side & the speaker cables down the other
-
I put the power and remote turn on down the sill and RCA & Speakers down the centre. Will find out tomorrow if its ok.
-
you might get away with it if they are really good cables as its just for a sub...