MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Craigevs on April 11, 2012, 06:56:43 pm
-
Hi, Just purchased a RNS 510 and iv noticed that i have Battery drain. ( The player has black screen and runs when off ) Iv been recommended from Edition38.com that there is a guy called EDDIE-NL which could solve the problem.
Any help would be much appreciated :smiley:
Many thanks Craig
-
When was your car made?
-
2008, is it a big problem to fix?
-
You really need to find out what version gateway you have installed, something you can do with a vcds scan.
If it needs updating then you can get an updated one from Eddie.
http://www.mk5golfgti.co.uk/forum/index.php/topic,40034.0.html
-
Sorry to be a pain, What's a Vcds? i really dont know what this stuff is. Me + electrical issues = disaster ha :stupid:
-
Sorry to be a pain, What's a Vcds? i really dont know what this stuff is. Me + electrical issues = disaster ha :stupid:
its a progam on a lap top that reads data of your ecu--through the serial port in your car
-
Will i be able to get the info through a vagcom? if so what am i looking for?
-
Will i be able to get the info through a vagcom? if so what am i looking for?
vcds is the new name for vag-com.
And yes, do a scan and post the CAN Gateway (address 19) details. :smiley:
-
Okay ill do that tomorrow. Iv never used this equipment before so are there any sub menus that i need to go into to find the specific info? Now i keep seeing this member called Eddie-NL that seem to be able to renew the parts ect... When i post this info what happens then?
Sorry for my lack of electrical automotive knowledge. I really do appreciate all the help. :)
-
Eddie will tell you from the scan what part you need or drop him a pm
-
thanks mate ill send him a pm tomorrow once i ( some how ) manage to get this info.
-
Iv got my hands on a VCDS iv had a little play and got into the CAN GATEWAY from there what information does Eddie require?
-
Iv got my hands on a VCDS iv had a little play and got into the CAN GATEWAY from there what information does Eddie require?
This is my info for that address:
Address 19: CAN Gateway Labels: 1K0-907-530.lbl
Part No SW: 1K0 907 530 F HW: 1K0 907 951
Component: Gateway H10 0120
Revision: H10 Serial number: 280010630309E0
Coding: 7F3F0742070003
Shop #: WSC 01287 785 00200
VCID: 2A50CF2BFC6F
My gateway version is F
-
wan't there a battery drain issue with one of the versions of the RNS? i swear i've read something on here about it :stupid:
-
It's the software that causes the drain. From whet I've gathered it doesn't get the signal from the gateway to turn off
-
This is everything i can get from CAN GATEWAY / ECU INFORMATION;-
VAG NO;- 1K0907530L
CODING;-0000000
COMPONENT;- J533
IMP;- 0785
GATEWAY;- H070052
WSC;- 001279
This is what i get when i go CAN GATEWAY / READ CODES
SPORADIC 0004-NO SIGNAL/COMMUNICATION
CONTROL MODULE INCORRECTLY CODED.
its only been 24 hours and already I'm getting annoyed with this battery thing haha
-
Are you using a vcds cable as your results don't seem to be vcds format? I got my info after doing an auto scan of the car.
Your error SPORADIC 0004-NO SIGNAL/COMMUNICATION CONTROL MODULE INCORRECTLY CODED suggests to me that maybe the gateway wasn't incompletely coded for all your hardware. You need to let the ecu know that you've installed a RNS 510 in the long coding.
-
wan't there a battery drain issue with one of the versions of the RNS? i swear i've read something on here about it :stupid:
Yes, this problem does affect the RNS 510 if the firmware is upgraded to 2660 or higher and requires the CAN bus gateway to be upgraded.
-
so it is the CAN GATEWAY. Which iv located behind a cluster of fuses which are situated behind the compartment near your right knee. So is it safe for me to reassemble the dash around the 510 unit?
-
Your Can-Gateway just needs coding correctly by the looks of it.
I'm surprised you have an L revision in a 2008 car. Unless it's been sat on a dock somewhere since Jun 07 as from about Mar 08 they were S Revisions. My 08 Octy had and S revision.
-
L version shouldn't cause battery drain.
Are you suffering from battery drain, the unit won't shutdown properly for a short time after you have locked the car
-
How do i clear the codes/ code them properly? well the unit never turns off iv left it over a hour and i still hear the cd drive spinning. Even when the battery is removed as soon as the battery is reattached it starts spinning the disc. thanks for the help guys.. :happy2:
-
Strange,
As I have 57 2008 mkv, and fitted rcd 510, and have no battery drain issues. When your car was actually build? 2008 + cars should have updated canbus gateway. My car was build in 2008 January and part number is 530L
Sent from my Galaxy Nexus using Tapatalk 2
-
If your stuck Craig I live in the Rhondda and can scan the car for you
-
The problem is fixed :) i still have an error code coming up and when i erase it just come straight back. Iv spoken with Eddie and he reckons its the sat nav causing the code. It just needs adding to the unit via vag-com. I might have to take you up on that offer BOXXER1973. How much £££ would you want? :smiley:
-
Free mate
-
Hi, I just changed my 1K0 907 530 E with a L version and after coding id does not drain my battery anymore but I got those 2 error codes
2 Faults Found:
01518 - Bulb for Back-Up Lights; Left (M16)
012 - Electrical Fault in Circuit
01506 - Bulb for Rear Fog; Right (L47)
012 - Electrical Fault in Circuit
The bulbs are OK but they don`t light up anymore :(
Can anyone give me an idea? Can be from the can gateway or is something else?
-
Possibly coded the gateway for left hand drive, as the two faults are for the reversing light and fog light which are on opposite sides for LHD cars.
-
Yes you are right .... just figured that after reading the codes again :)
Thank you .... changed from right hand to left hand and all works great