MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Technical Workshop => Topic started by: WolverineMAc on April 17, 2012, 02:26:09 pm
-
Hi
I have an ed 30 2007 and have been offered R32 Highline Cluster part no 1K6920 972F how can I find out what my current cluster is without scanning the car?
-
Take it off and look at the sticker on the back?
-
or get someone to scan you car. :happy2:
-
Hi
I have an ed 30 2007 and have been offered R32 Highline Cluster part no 1K6920 972F how can I find out what my current cluster is without scanning the car?
Would have thought yours being an 07 would have a 973 or 974, a scan or cluster out will confirm what you have mate :happy2:
-
Would have thought yours being an 07 would have a 973 or 974, a scan or cluster out will confirm what you have mate :happy2:
Correct, All ED30s have 1K69209x3 or 1K69209x4 (x=6/7 Midline/Highline)
-
Thanks guys, there was a 972 going on ebay for £100, glad i did not buy it.
-
Sorry to jump in on you post wolverinnemac but I have some similar questions...
May have found a donor car with highline, mfsw and perhaps other good bits.
Looking to swap this over to my car with midline, no mfsw etc.
I believe I will also need its steering controller and a small airbag loom?
my dash is 1ko920963b, After reading the sticky I assume i'm looking for 1k0920973b?
Whats the deal with the ones ending in 3 and 4, I have read there are problems with this type?
Cheers
Can older 71 and 72 be fitted in place of the 3's without problems?