MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: KC_Gti on April 20, 2012, 01:23:14 pm
-
Finally managed to get my set of Cupra brakes installed today at Votex by Mike, who I'd also like to add is a top bloke and would definetly recommend them :happy2:
Huge difference to stopping power, BUT the squeal it makes when braking from a slow pace (tapping the brake pedal) is awful and so bloody loud! At other paces, e.g. braking from 10mph+ its fine. The brakes were purchased from forum member and have covered around 2000miles. Is this normal for the Tarox pads?
Think the pads are these - >
http://www.awesome-gti.co.uk/product.php?xProd=11718&xSec=10410
Video I made when braking....the noise is horrible! :sick:
-
I had those on my old car and they made no noise what so ever.
-
Did you fit any shims on the back of the pads to stop the squeel?
-
Did you fit any shims on the back of the pads to stop the squeel?
+1 also where the pads fitted with any copper grease etc?
-
Don't think so. The pads were already attached to the calipers when I got them. I presume the only way to get around this is to take the pads off and put shims and copper grease on them? :confused:
-
Yes that's what I would do copper grease on the points where the pads contact the carrier and a small amount where the caliper touches the pads ie the piston etc
-
I had the Tarox Strada pads on my car bought as a package with zero sixty discs fgrom awesome GTI. Didnt have much extra noise that i can recall, but i do recall the pads being worse than stock. Brake fade central :scared: